To select the desired boot medium set the DIP switches S3, S9 accordingly
S3
S3
S3
S3-2 ON: TQMLS102xA without eMMC
S3-2 OFF: TQMLS102xA with eMMC
S9 | DIP 1 | DIP 2 |
---|---|---|
HDMI | ON | ON |
LVDS | OFF | ON |
UCC | ON | OFF |
LVDS_RGBINV | OFF | OFF |
S9 | DIP 3 | DIP 4 |
---|---|---|
EC1 | ON | ON |
CAN1 / CAN2 | OFF | ON |
SAI1 / SAI2 | ON | OFF |
Reserved | OFF | OFF |
Function | S9-1 | S9-2 | S9-3 | S9-4 |
---|---|---|---|---|
#1 EC1 + HDMI | ON | ON | ON | ON |
#2 EC1 + LVDS | OFF | ON | ON | ON |
#3 EC1 + UCC | ON | OFF | ON | ON |
#4 EC1 + LVDS_RGBINV | OFF | OFF | ON | ON |
#5 CAN + HDMI | ON | ON | OFF | ON |
#6 CAN + LVDS | OFF | ON | OFF | ON |
#7 CAN + UCC | ON | OFF | OFF | ON |
#8 CAN + LVDS_RGBINV | OFF | OFF | OFF | ON |
#9 SAI + HDMI | ON | ON | ON | OFF |
#10 SAI + LVDS | OFF | ON | ON | OFF |
#11 SAI + UCC | ON | OFF | ON | OFF |
#12 SAI + LVDS_RGBINV | OFF | OFF | ON | OFF |
#13 - #16 reserved | / | / | OFF | OFF |
DIP-Switch settings for CAN and RS485.
DIP switch S2 is used to configure the CAN interfaces CAN1 and CAN2.
DIP | OFF (default) | ON |
---|---|---|
S2-1 | CAN0 not terminated | CAN0 interface terminated (120Ω) |
S2-2 | CAN1 not terminated | CAN1 interface terminated (120Ω) |
DIP switch S1 is used to configure the RS485 interface.
DIP | OFF (default) | ON |
---|---|---|
S1-1 | RS485 RxD not terminated | RS485 RxD terminated (120Ω) |
S1-2 | RS485 TxD not terminated | RS485 TxD terminated (120Ω) |