Table of Contents
Starterkit default DIP switch settings
STKLS1046A
SD-Card RCW 3333_5559 (Default RCW)
S5
S6
S7
S8
S10
Boot Device Selection (S5)
To select the desired boot medium set the DIP switches accordingly
SD-Card
S5
eMMC
S5
QSPI NOR
S5
MBLS10xxA Configuration DIP (S6,S7,S8,S10)
S6
| DIP | ON | OFF |
|---|---|---|
| 1 | SerDes1 Lane A - SGMII | SerDes1 Lane A - QSGMII |
| 2 | SerDes1 Lane B - SGMII | SerDes1 Lane B - QSGMII |
| 3 | SerDes1 Lane D - SGMII | SerDes1 Lane D - XFI2 |
| 4 | SerDes2 Lane B - MPCIe | SerDes2 Lane B - SGMII |
S7
| DIP | Function | ON | OFF |
|---|---|---|---|
| 1 | QSGMII1 CLK SEL | 156.25 MHz | 125 MHz |
| 2 | QSGMII PHY1 CONFIG | QSGMII to Copper | SGMII to Copper |
| 3 | QSGMII2 CLK SEL | 156.25 MHz | 125 MHz |
| 4 | QSGMII PHY2 CONFIG | QSGMII to Copper | SGMII to Copper |
S8
| DIP | Function | ON | OFF |
|---|---|---|---|
| 1 | SerDes2 Lane D | PCIe | MPCIE/SATA |
| 2 | SerDes2 Lane D | SATA | MPCIE |
| 3 | Demuxing | turn off | turn on |
| 4 | SerDes1 REF CLK2 | 156.25 MHz | 125 MHz |
S10
| DIP | ON | OFF |
|---|---|---|
| 1 | DVDD=3.3V | DVDD=1.8V |
| 2 | EVDD=3.3V | EVDD=1.8V |