Copy Insyde Firmware Flash Tool to USB-Stick
<USB key> ├───H2OFFT-Sx64.efi
The BIOS-Update-USB Stick is now ready for updating and flashing BIOS images.
For further Information please see the following section.
<USB key> ├─── H2OFFT-Sx64.efi ├─── TQMx120UC_05.44.23.50.02.bin
fs0:
. This depends on the amount of connected mass storage devices. With command ls
you can check the content of the path.H2OFFT_Sx64.efi TQMx120UC_05.44.23.50.02.bin –ALL –RA
⇒ BIOS will reboot into EFI shell after the update has finished succesfully
The BIOS source can be selected on the (TQMx120) SPI flash via connector DIS1# (X17) on MB-COME6-4.
DIS1# (X17) | |
---|---|
Open | BIOS will load from internal SPI Flash |
Close | BIOS will load from external SPI Flash |
The following SPI flash devices are supported:
Platform/Module | SPI flash device | SPI flash vendor |
---|---|---|
TQMx120 | MX25L25645GM2I | Macronix |
Flashing the Carrier SPI Chip is only possible with a working module.
How to:
Shell> fs0: <Enter> fs0:> H2OFFT_Sx64.efi TQMx120UC_05.44.23.50.02.bin –ALL –RA -N
To recover the onboard BIOS with the Carrier SPI Flash Chip, a preflashed BIOS SPI Chip is required.
Please see Flash BIOS to Carrier SPI Flash Chip above.
How To:
Shell> fs0: <Enter> fs0:\> H2OFFT_Sx64.efi TQMx120UC_05.44.23.50.02 –ALL –RA -N