To activate or deactivate eMMC Support apply the following settings.
Setup Utility > Advanced > PCH-IO Configuration > SCS Configuration
To activate Console Recirection in the BIOS via the serial port in addition to the display output on the Starterkit apply the following steps.
It can be useful for BIOS remote control tasks.
Setup Utility > Advanced > Console Redirection > Enabled
Bautrate: | 115200 |
---|---|
Data bits: | 8 |
Parity: | none |
Stop bits: | 1 |
Handshake : | XON/XOFF |
⇒ Reboot the Starterkit and use the terminal emulator to set up the BIOS
With 'Fan Scaling' option it is possible to control the system temperature at a certain load of the system by setting up the fan speed at certain trip points.
To create a custom 'Fan Scaling' plan apply the following steps in the BIOS setup.
Setup Utility > Advanced > SIO Hardware Monitor Nuvoton NCT7802Y > Enable Fan Scaling
To activate or deactivate CPU cores apply the following settings.
Setup Utility > Advanced > CPU Configuration > Active Processor Cores
With 'State after G3' option you can specify the behaviour of the system after power is supplied.
Configuring 'State after G3:
State | Definition |
---|---|
S0 | System starts up directly after power is supplied |
S5 | System is held in power-off state until power button is pressed |
Setup Utility > Advanced > PCH-IO Configuration > State After G3