Fix 'ME Image Re-Flash' Option not working correctly
Adapt help text for Active LFP
Fix not working EFP2 in VBIOS
Adapt PCIe Configuration menu
Integrate SioNct7802y
Import SioTqmx86 from TQMx60EB module
Add Switch to disabel LVDS bridge
Add Switch for COMe Lane configuration
Add Switch for GPIO/SD-Card configuration
Hide GPIO/SD-Card information
Add Swtich for COM Express Serial Handshake
Hide PCI Express PEG Port Configuration
Disable End Of Post Message
Change Default Configuration
Clock0 assignment <Enabled>
Clock2 assignment <Enabled>
Audio DSP <Disabled>
I2C0 Controller <Disabled>
I2C1 Controller <Disabled>
I2C4 Controller <Disabled>
UART0 Controller <Disabled>
ISH Controller <Disabled>
Flash Protection Range Registers (FPRR) <Disabled>
CNVi Mode <Disabled>
ACPI D3Cold Support <Disabled>
Topology (All PCIe Ports) <x1>
ASPM X (All PCIe Ports) <Disabled>
L1 Substates (All PCIe Ports) <Disabled>
Serial IRQ Mode <Continous>
Package C State Limit <C3>
PS2 Keyboard and Mouse <Disabled>
Numlock <On>
Adapt Setup menu
Reserve IRQ11 for use with (internal) PCI bus
Set SMBIOS data
Add USB touch support
Adapt VBIOS / GOP configuration
Enable Usage of SPI flashes not listed
Add verb table for ALC262 coded on COME6-2 carrier board
Disable Thunderbolt support
Decrease Boot Time
Disabel USB Type C
Disable SD, eMMC
Disable EC commands
Use OemSvcLoadDefaultSetupMenu for 3x reset processing
Add TQ boot logo
Add TQ specific GPIO Table
Disable Ps2 Keyboard in ACPI
Disable EC support
Disable End Of Post Message
Enable USB Hot key Support as default
Disable BIOS Lock
Integrate ME FW Corporate 12.0.32.1421
Disable clock output configuration (ITPXDP, SRC1, SRC3, SRC4, SRC5)
Set SPI re-binding
Set USB3.0 to Gen1
Enable Dual Read and add Winbond and Macronix chip to VSCC Entry
Set all GPIO voltages to 3,3 Volt
Adapt version number and string
Enable build time flag in BIOS setup menu
Do not only use primary display
Do not save password in CMOS
enable Snap-Screen support