Search Results

You can find the results of your search below.

Fulltext results:

deployment_yocto @en:arm:tqma8mpxs:linux:yocto
45 Hits, Last modified:
age> $ sudo dd if=tq-image-weston-debug-tqma8mpxs-mb-smarc-2.rootfs.wic of=/dev/sdc bs=1M conv=fsync #Assuming the SD card is assigned to ... irectory): * Bootstream: ''imx-boot-tqma8mpxs-mb-smarc-2-uuu.bin-flash_spl'' * WIC-Image: ''*.wic'' ... ic.zst'' (e.g., ''tq-image-weston-debug-tqma8mpxs-mb-smarc-2.rootfs.wic.zst'') ==== Prepare Hardware (Seria... - Power off the module. - Set the DIP switch S1 on the mainboard (MBa8MPxS) as follows: <grid> <col sm="6" xs="12"> <
mcuexample @en:arm:tqma8mpxs:linux:yocto:how-to
37 Hits, Last modified:
west build mcuxsdk-examples-tq/_boards/tqma8mpxs-mb-smarc-2/examples/demo_apps/hello_world --board tqma8mpxs-mb-smarc-2 -Dcore_id=cm7 -DBINARY_DIR=mcuxsdk-examples-tq/... B cable to X20 and a USB-to-RS232 cable to X40 of MB-SMARC-2 and open these two ports in a serial terminal. ... ode> # when loading from usb usb start load usb 0:1 0x48000000 hello_world_cm7.bin # or when loading from SD fatload mmc 1:1 0x48000000 hello_world_cm7.bin </code> <code> c
manual-bootstream @en:arm:tqma8mpxs:linux:yocto:how-to
19 Hits, Last modified:
c0708dc46950dc32d2496219738 make tqma8mpxs_multi_mb_smarc_2_defconfig make BL31=../atf/build/imx8mp/release... cp ../u-boot-tqmaxx/arch/arm/dts/imx8mp-tqma8mpqs-mb-smarc-2.dtb ./iMX8M cp ../u-boot-tqmaxx/u-boot-nodtb.bi... dr4_pmu* ./iMX8M cd iMX8M ln -s imx8mp-tqma8mpqs-mb-smarc-2.dtb imx8mp-evk.dtb touch tee.bin cd .. </code> ... <code> make SOC=iMX8MP EXT_DTB=imx8mp-tqma8mpqs-mb-smarc-2 BL32=none flash_evk </code> <callout type="inf
can @en:arm:tqma8mpxs:linux:yocto:how-to
16 Hits, Last modified:
/nav> ---- <panel type="default" title="CAN"> The MB-SMARC-2 provides two CAN interfaces: CAN0 on X29 and CAN1 on X30. <grid> <col sm="6"> <panel type="primary"... oopback"> {{ :en:arm:tqma8mpxs:linux:yocto:how-to:mb-smarc-2_can.png?nolink&400 |}} </panel> </col> </grid> ==== CAN Loopback Test ==== === CAN0 -> CAN1 === <code> candump can0& cansend can1 5A1#11.2233.44556677.88 </code> === CAN1 -> CAN0 === <code> c
quickstart_yocto @en:arm:tqma8mpxs:linux:yocto
15 Hits, Last modified:
mod_name_a="TQMa8MPxS"| mod_name_b="tqma8mpxs"| mb_name_a="MB-SMARC-2"| machine="tqma8mpxs-mb-smarc-2"| target-machines="++tqma8mpxs-mb-smarc-2 \| TQMa8MPxS on MB-SMARC-2 ++"| default-machine="tqma8mpxs-mb-smarc-2"| uboot_ver="[[https://github.com/tq-systems/u-boot-tqmaxx/tre
audio @en:arm:tqma8mpxs:linux:yocto:how-to
12 Hits, Last modified:
hones or active speakers have to be connected to X18 on MB-SMARC-2. <code> speaker-test --channels 2 --test wav -... e audio test files. </callout> **Record Audio on MB-SMARC-2** To record audio from the Line-In interface,
spi @en:arm:tqma8mpxs:linux:yocto:how-to
12 Hits, Last modified:
SPI_MOSI and SPI_MISO need to be bridged: On MB-SMARC-2 the corresponding pins are pins 15 and 16 on X24. <code> echo -n -e "\x01\x0F" | spi-pipe -d <spi interface> -s 10000000 | hexdump (e.g. echo -n -e "\x01\x0F" | spi-pipe -d /dev/spidev1.0 -s 10000000 | hexdump) </c
yocto_build_system @en:arm:tqma8mpxs:linux:yocto:how-to
12 Hits, Last modified:
nel_name="linux-tq_6.12"| fragment_dir="tqma8mpxs_mb-smarc-2-tq-linux/linux-imx-tq/6.6.91+git/build/fragment.cfg"| git_checkout="scarthgap.
machinelearning @en:arm:tqma8mpxs:linux:yocto:how-to
11 Hits, Last modified:
**arch/arm64/boot/dts/freescale/imx8mp-tqma8mpqs-mb-smarc-2.dts**: <code> &ml_vipsi { status = "ok... changing environmentvariable ''USE_GPU_INFERENCE=1''), a ''[query_hardware_caps:66]Unsupported evis
overview @en:arm:tqma8mpxs:linux:yocto
8 Hits, Last modified:
rview ===== The TQMa8MPxS which is located on the MB-SMARC-2 provides a powerful embedded module platform ba... OM (optional) | 0x6B\\ Gyroscope | ^I2C Bus - MB-SMARC-2^ |I2C1 | 0x50\\ EEPROM | 0x58\\ EEPROM | 0x6A\\ PCIE | 0x74\\ Port-Expander | 0x75\\ P