Search Results

You can find the results of your search below.

Fulltext results:

deployment_yocto @en:arm:tqma95xxsa:linux:yocto
40 Hits, Last modified:
$ sudo dd if=tq-image-weston-debug-tqma95xxsa-4gb-mb-smarc-2.rootfs.wic of=/dev/sdc bs=1M conv=fsync #Assuming the SD card is assigned to ... t'' (e.g., ''tq-image-weston-debug-tqma95xxsa-4gb-mb-smarc-2.rootfs.wic.zst'') ==== Prepare Hardware (Seria... dule. - Set the DIP switch S3 on the mainboard (MB-SMARC-2) as follows: <grid> <col sm="6" xs="12"> <pane... a95xxSA:** <code>sudo uuu imx-boot-tqma95xxsa-4gb-mb-smarc-2-sd.bin-flash_a55</code> </panel> <panel type="
dip_switches @en:arm:tqma95xxsa:mb-smarc-2
28 Hits, Last modified:
====== MB-SMARC-2 DIP switch settings ====== =====Boot Modes===== The following boot modes can be selected by the DIP switch S3 on the MB-SMARC-2. <grid> <col sm="4" xs="12"> <panel type="primary" title="SD-Card"> <WRAP centeralign> [size=150%]**S3**[/size] {{ :en:dip_4_0110.png?nolink&150
quickstart_yocto @en:arm:tqma95xxsa:linux:yocto
25 Hits, Last modified:
od_name_a="TQMa95xxSA"| mod_name_b="tqma95xxsa"| mb_name_a="MB-SMARC-2"| default-machine="tqma95xxsa-4gb-mb-smarc-2"| machine="tqma95xxsa-4gb-mb-smarc-2"| target-machines="++ tqma95xxsa-2gb-mb-smarc-2 \| TQMa95xxSA with 2GB RAM on MB-SMARC-2 ++ \\ ++ tqma95xxsa-4gb-mb-smarc-2 \| TQMa95xxSA wit
can @en:arm:tqma95xxsa:linux:yocto:how-to
16 Hits, Last modified:
/nav> ---- <panel type="default" title="CAN"> The MB-SMARC-2 provides two CAN interfaces: CAN0 on X29 and CAN1 on X30. <grid> <col sm="6"> <panel type="primary"... oopback"> {{ :en:arm:tqma8mpxs:linux:yocto:how-to:mb-smarc-2_can.png?nolink&400 |}} </panel> </col> </grid> ==== CAN Loopback Test ==== === CAN0 -> CAN1 === <code> candump can0& cansend can1 5A1#11.2233.44556677.88 </code> === CAN1 -> CAN0 === <code> c
audio @en:arm:tqma95xxsa:linux:yocto:how-to
12 Hits, Last modified:
hones or active speakers have to be connected to X18 on MB-SMARC-2. <code> speaker-test --channels 2 --test wav -... e audio test files. </callout> **Record Audio on MB-SMARC-2** To record audio from the Line-In interface,
spi @en:arm:tqma95xxsa:linux:yocto:how-to
12 Hits, Last modified:
SPI_MOSI and SPI_MISO need to be bridged: On MB-SMARC-2 the corresponding pins are pins 15 and 16 on X24. <code> echo -n -e "\x01\x0F" | spi-pipe -d <spi interface> -s 10000000 | hexdump (e.g. echo -n -e "\x01\x0F" | spi-pipe -d /dev/spidev1.0 -s 10000000 | hexdump) </c
yocto_build_system @en:arm:tqma95xxsa:linux:yocto:how-to
12 Hits, Last modified:
ame="linux-imx-tq_6.12"| fragment_dir="tqma95xxsa_mb-smarc-2-tq-linux/linux-imx-tq/6.12.55+git/build/fragment.cfg"| git_checkout="scarth
overview @en:arm:tqma95xxsa:linux:yocto
6 Hits, Last modified:
OM (optional) | 0x6B\\ Gyroscope | ^I2C Bus - MB-SMARC-2^ |I2C1 | 0x30\\ Audio-Codec | 0x50\\ EEPROM | 0x58\\ EEPROM | 0x6A\\ PCIE | 0x74\\ Por
stk_quicksteps @en:arm:tqma95xxsa:mb-smarc-2
5 Hits, Last modified:
"|stk_name="STKa95xxSA"|mod_arch="arm"|qsg_name="EMB_QSG_STKa95xxSA_Rev"|qsg_revision="0100"|mod_name="TQMa95xxSA"|mb_name="MB-SMARC-2"|bsp_name="Linux"|build_system="Yocto"|usb_to_s