Search Results

You can find the results of your search below.

Fulltext results:

deployment_yocto
25 Hits, Last modified:
udo bmaptool copy tq-image-weston-debug-tqma8xqps-mb-smarc-2.rootfs.wic.zst /dev/sdc #Assuming the SD card i... age> $ sudo dd if=tq-image-weston-debug-tqma8xqps-mb-smarc-2.rootfs.wic of=/dev/sdc bs=1M conv=fsync #Assumi... irectory): * Bootstream: ''imx-boot-tqma8xqps-mb-smarc-2-mfgtool.bin-flash_spl'' * WIC-Image: ''*.wi... ic.zst'' (e.g., ''tq-image-weston-debug-tqma8xqps-mb-smarc-2.rootfs.wic.zst'') ==== Prepare Hardware (Seria
quickstart_yocto
19 Hits, Last modified:
|mod_name_code="tqma8xxs" |mod_name_mtq="TQ.ARM" |mb_name="MB-SMARC-2" |mb_name_code="mb-smarc-2" |bsp_rev="0006" |bsp_notation="BSP.SW" |uboot_version="[[https://github.com/tq-systems/u-bo... mage="tq-image-weston" |mtq_machines="++tqma8xqps-mb-smarc-2\|TQMa8XQPS on MB-SMARC-2++ \\ ++tqma8xdps-mb-smarc-2\|TQMa8XDPS on MB-SMARC-2++" |mtq_machine_default="tqma8xqps-mb-smarc-2" |mtq_repos="//ci-meta-tq//" |dist
target @en:arm:tqma8xxs:linux:yocto:how_to
17 Hits, Last modified:
pported in the current BSP version."|microphone="X19"|linein="X17"|lineout="X18"|mb_name="MB-SMARC-2"|audio_image="{{ :en:arm:tqma8xxs:linux:yocto:h... plate>en:templates:howto:can|can_description="The MB-SMARC-2 provides the CAN interfaces CAN0 and CAN1."|dipdescription="DIP switch S4 is used to config... ="<device tree>'' (e.g. ''setenv fdt_file imx8qxp-mb-smarc-2-lvds0-tm070jvhg33.dtb'')"}} {{template>en:temp... s:howto:rtc|}} {{template>en:templates:howto:spi|mb_name="MB-SMARC-2"|amountspi="one"|spi_table="\| SPI0\| /dev/spid
can @en:arm:tqma8xxs:linux:yocto:how-to
13 Hits, Last modified:
/nav> ---- <panel type="default" title="CAN"> The MB-SMARC-2 provides two CAN interfaces: CAN0 and CAN1. <grid> <col sm="6"> <panel type="primary" title=... "> DIP switch S4 is used to configure CAN0 and CAN1. ^ Function ^ S4-1 ^ S4-2 ^ | CAN-Bus not terminated | OFF | OFF | | not defined (illeg... ate) | ON | OFF | | CAN-Bus terminated with 120 Ohm | ON | ON | </panel> </col> <col sm="6
yocto_build_system @en:arm:tqma8xxs:linux:yocto:how-to
10 Hits, Last modified:
_name="linux-imx-tq_6.6"| fragment_dir="tqma8xqps_mb-smarc-2-tq-linux/linux-imx-tq/6.6.101-r0/fragment.cfg"| git_checkout="scarthgap.TQ.ARM.
known_issues
9 Hits, Last modified:
_name_head="Linux"}} \\ \\ ==== Audio output on MB-SMARC-2 ≤ Rev.0102 ==== ^ Details || ^ [c]Effect[/c] | No audio output on MB-SMARC-2 ≤ Rev.0102 | ^ [c]Issue[/c] | Audio Connector X18 is rou... ] | TQMa8XxS ≥ Rev.02xx | ^ [c]Mainboard[/c] | MB-SMARC-2 ≤ Rev.0102 | ^ Solution || ^ [c]Fix[/c] | Remove resistors R1 | ^ [c]Workaround[/c] | Will be fixed with MB-SMARC-2 Rev.0103 | ----
spi @en:arm:tqma8xxs:linux:yocto:how-to
6 Hits, Last modified:
SPI_MOSI and SPI_MISO need to be bridged: On MB-SMARC-2 the corresponding pins are pins 15 and 16 on X24. <code> echo -n -e "\x01\x0F" | spi-pipe -d <spi interface> -s 10000000 | hexdump (e.g. echo -n -e "\x01\x0F" | spi-pipe -d /dev/spidev0.0 -s 10000000 | hexdump) </c