Search Results

Fulltext results:

deployment_yocto

23 Hits, Last modified: 11 days ago

maptool copy tq-image-weston-debug-tqma95xxsa-4gb-mb-smarc-2.rootfs.wic.zst /dev/sdc #Assuming the SD card i... $ sudo dd if=tq-image-weston-debug-tqma95xxsa-4gb-mb-smarc-2.rootfs.wic of=/dev/sdc bs=1M conv=fsync #Assumi... t'' (e.g., ''tq-image-weston-debug-tqma95xxsa-4gb-mb-smarc-2.rootfs.wic.zst'') ==== Prepare Hardware (Seria... dule. - Set the DIP switch S3 on the mainboard (MB-SMARC-2) as follows: <grid> <col sm="6" xs="12"> <pane

quickstart_yocto

20 Hits, Last modified: 11 days ago

od_name_a="TQMa95xxSA"| mod_name_b="tqma95xxsa"| mb_name_a="MB-SMARC-2"| default-machine="tqma95xxsa-4gb-mb-smarc-2"| machine="tqma95xxsa-4gb-mb-smarc-2"| target-machines="++ tqma95xxsa-2gb-mb-smarc-2 \| TQMa95xxSA with 2GB RAM on MB-SMARC-2 ++ \\ ++ tqma95xxsa-4gb-mb-smarc-2 \| TQMa95xxSA wit

can @en:arm:tqma95xxsa:linux:yocto:how-to

15 Hits, Last modified: 11 days ago

/nav> ---- <panel type="default" title="CAN"> The MB-SMARC-2 provides two CAN interfaces: CAN0 on X29 and CAN1 on X30. <grid> <col sm="6"> <panel type="primary"... oopback"> {{ :en:arm:tqma8mpxs:linux:yocto:how-to:mb-smarc-2_can.png?nolink&400 |}} </panel> </col> </grid> ==== CAN Loopback Test ==== === CAN0 -> CAN1 === <code> candump can0& cansend can1 5A1#11.2233.44556677.88 </code> === CAN1 -> CAN0 === <code> c

spi @en:arm:tqma95xxsa:linux:yocto:how-to

8 Hits, Last modified: 11 days ago

SPI_MOSI and SPI_MISO need to be bridged: On MB-SMARC-2 the corresponding pins are pins 15 and 16 on X24. <code> echo -n -e "\x01\x0F" | spi-pipe -d <spi interface> -s 10000000 | hexdump (e.g. echo -n -e "\x01\x0F" | spi-pipe -d /dev/spidev1.0 -s 10000000 | hexdump) </c

overview

5 Hits, Last modified: 11 days ago

OM (optional) | 0x6B\\ Gyroscope | ^I2C Bus - MB-SMARC-2^ |I2C1 | 0x30\\ Audio-Codec | 0x50\\ EEPROM | 0x58\\ EEPROM | 0x6A\\ PCIE | 0x74\\ Por