Search Results
You can find the results of your search below.
Fulltext results:
- data @en:arm:tqma8xxs
- ta-tq/tree/sumo-tqma8x|sumo-tqma8x]] | tqma8xps-mb-smarc-2\\ tqma8xds-mb-smarc-2 | v2018.03-rel_imx_4.14.98_2.2.0_ga | rel_imx_4.14.98_2.2.0_ga | | [... ta-tq/tree/sumo-tqma8x|sumo-tqma8x]] | tqma8xps-mb-smarc-2\\ tqma8xds-mb-smarc-2 | v2018.03-rel_imx_4.14.98_2.2.0_ga | rel_imx_4.14.98_2.2.0_ga | | [... ta-tq/tree/sumo-tqma8x|sumo-tqma8x]] | tqma8xps-mb-smarc-2\\ tqma8xds-mb-smarc-2 | v2018.03 rel_imx_4.14.78_1.0.0_ga | rel_imx_4.14.78_1.0.0_ga | | [[https... ta-tq/tree/sumo-tqma8x|sumo-tqma8x]] | tqma8xps-mb-smarc-2 | v2018.03 rel_imx_4.14.78_1.0.0_ga | rel_imx_4.14.78_1.0.0_ga | | [[https
- deployment_yocto @en:arm:tqma8mpxs:linux:yocto
- - Power off the module. - Set the DIP switch S1 on the mainboard (MB-SMARC-2) as follows: <grid> <col sm="6" xs="12"> <pane... he TQMa8MPxS:** <code>sudo uuu imx-boot-tqma8mpxs-mb-smarc-2-uuu.bin-flash_spl_uboot</code> </panel> <panel... ode>sudo uuu -bmap -b emmc_all imx-boot-tqma8mpxs-mb-smarc-2-uuu.bin-flash_spl_uboot tq-image-weston-debug-tqma8mpxs-mb-smarc-2.rootfs.wic.zst</code> <alert type="warning" di... stom script can be found here: <code> uuu_version 1.5.4 SDPS: delay 500 SDPS: @ boot -f @BOOTSTREAM@
- deployment_yocto @en:arm:tqma95xxsa:linux:yocto
- me="TQMa95xxSA"| mod_name_lower="tqma95xxsa-4gb"| mb_name="MB-SMARC-2"| mb_name_lower="mb-smarc-2"| uboot_spi_name="uboot"| ubirootfs_name="ubirootfs"| uboot_bootstream_file="imx-boot-tqma95xxsa-4gb-mb-smarc-2-sd.bin-flash_a55_flexspi"| }} ===== Create SD-... maptool copy tq-image-weston-debug-tqma95xxsa-4gb-mb-smarc-2.rootfs.wic.zst /dev/sdc #Assuming the SD card i
- deployment_yocto @en:arm:tqma8xxs:linux:yocto
- udo bmaptool copy tq-image-weston-debug-tqma8xqps-mb-smarc-2.rootfs.wic.zst /dev/sdc #Assuming the SD card i... age> $ sudo dd if=tq-image-weston-debug-tqma8xqps-mb-smarc-2.rootfs.wic of=/dev/sdc bs=1M conv=fsync #Assumi... irectory): * Bootstream: ''imx-boot-tqma8xqps-mb-smarc-2-uuu.bin-flash_spl'' * WIC-Image: ''*.wic'' ... ic.zst'' (e.g., ''tq-image-weston-debug-tqma8xqps-mb-smarc-2.rootfs.wic.zst'') ==== Prepare Hardware (Seria
- mcuexample @en:arm:tqma8mpxs:linux:yocto:how-to
- west build mcuxsdk-examples-tq/_boards/tqma8mpxs-mb-smarc-2/examples/demo_apps/hello_world --board tqma8mpxs-mb-smarc-2 -Dcore_id=cm7 -DBINARY_DIR=mcuxsdk-examples-tq/... B cable to X20 and a USB-to-RS232 cable to X40 of MB-SMARC-2 and open these two ports in a serial terminal. ... ode> # when loading from usb usb start load usb 0:1 0x48000000 hello_world_cm7.bin # or when loading from SD fatload mmc 1:1 0x48000000 hello_world_cm7.bin </code> <code> c
- quickstart_yocto @en:arm:tqma95xxsa:linux:yocto
- od_name_a="TQMa95xxSA"| mod_name_b="tqma95xxsa"| mb_name_a="MB-SMARC-2"| default-machine="tqma95xxsa-4gb-mb-smarc-2"| machine="tqma95xxsa-4gb-mb-smarc-2"| target-machines="++ tqma95xxsa-2gb-mb-smarc-2 \| TQMa95xxSA with 2GB RAM on MB-SMARC-2 ++ \\ ++ tqma95xxsa-4gb-mb-smarc-2 \| TQMa95xxSA wit
- quickstart_yocto @en:arm:tqma8xxs:linux:yocto
- S"| mod_name_a="TQMa8XxS"| mod_name_b="tqma8xx"| mb_name_a="MB-SMARC-2"| default-machine="tqma8xqps-mb-smarc-2"| machine="tqma8xqps-mb-smarc-2"| target-machines="++tqma8xqps-mb-smarc-2\|TQMa8XQPS on MB-SMARC-2++ \\ ++tqma8xdps-mb-smarc-2\|TQMa8XDPS on MB-SMARC-2++"| uboot_ver="[[https://github.com/t
- target @en:arm:tqma8xxs:linux:yocto:how_to
- pported in the current BSP version."|microphone="X19"|linein="X17"|lineout="X18"|mb_name="MB-SMARC-2"|audio_image="{{ :en:arm:tqma8xxs:linux:yocto:h... plate>en:templates:howto:can|can_description="The MB-SMARC-2 provides the CAN interfaces CAN0 and CAN1."|dipdescription="DIP switch S4 is used to config... ="<device tree>'' (e.g. ''setenv fdt_file imx8qxp-mb-smarc-2-lvds0-tm070jvhg33.dtb'')"}} {{template>en:temp... s:howto:rtc|}} {{template>en:templates:howto:spi|mb_name="MB-SMARC-2"|amountspi="one"|spi_table="\| SPI0\| /dev/spid
- can @en:arm:tqma8mpxs:linux:yocto:how-to
- /nav> ---- <panel type="default" title="CAN"> The MB-SMARC-2 provides two CAN interfaces: CAN0 on X29 and CAN1 on X30. <grid> <col sm="6"> <panel type="primary"... oopback"> {{ :en:arm:tqma8mpxs:linux:yocto:how-to:mb-smarc-2_can.png?nolink&400 |}} </panel> </col> </grid> ==== CAN Loopback Test ==== === CAN0 -> CAN1 === <code> candump can0& cansend can1 5A1#11.2233.44556677.88 </code> === CAN1 -> CAN0 === <code> c
- can @en:arm:tqma95xxsa:linux:yocto:how-to
- /nav> ---- <panel type="default" title="CAN"> The MB-SMARC-2 provides two CAN interfaces: CAN0 on X29 and CAN1 on X30. <grid> <col sm="6"> <panel type="primary"... oopback"> {{ :en:arm:tqma8mpxs:linux:yocto:how-to:mb-smarc-2_can.png?nolink&400 |}} </panel> </col> </grid> ==== CAN Loopback Test ==== === CAN0 -> CAN1 === <code> candump can0& cansend can1 5A1#11.2233.44556677.88 </code> === CAN1 -> CAN0 === <code> c
- quickstart_yocto @en:arm:tqma8mpxs:linux:yocto
- mod_name_a="TQMa8MPxS"| mod_name_b="tqma8mpxs"| mb_name_a="MB-SMARC-2"| machine="tqma8mpxs-mb-smarc-2"| target-machines="++tqma8mpxs-mb-smarc-2 \| TQMa8MPxS on MB-SMARC-2 ++"| default-machine="tqma8mpxs-mb-smarc-2"| uboot_ver="[[https://github.com/tq-systems/u-boot-tqmaxx/tre
- manual-bootstream @en:arm:tqma8mpxs:linux:yocto:how-to
- c0708dc46950dc32d2496219738 make tqma8mpxs_multi_mb_smarc_2_defconfig make BL31=../atf/build/imx8mp/release... cp ../u-boot-tqmaxx/arch/arm/dts/imx8mp-tqma8mpqs-mb-smarc-2.dtb ./iMX8M cp ../u-boot-tqmaxx/u-boot-nodtb.bi... dr4_pmu* ./iMX8M cd iMX8M ln -s imx8mp-tqma8mpqs-mb-smarc-2.dtb imx8mp-evk.dtb touch tee.bin cd .. </code> ... <code> make SOC=iMX8MP EXT_DTB=imx8mp-tqma8mpqs-mb-smarc-2 BL32=none flash_evk </code> <callout type="inf
- can @en:arm:tqma8xxs:linux:yocto:how-to
- /nav> ---- <panel type="default" title="CAN"> The MB-SMARC-2 provides two CAN interfaces: CAN0 and CAN1. <grid> <col sm="6"> <panel type="primary" title=... "> DIP switch S4 is used to configure CAN0 and CAN1. ^ Function ^ S4-1 ^ S4-2 ^ | CAN-Bus not terminated | OFF | OFF | | not defined (illeg... ate) | ON | OFF | | CAN-Bus terminated with 120 Ohm | ON | ON | </panel> </col> <col sm="6
- yocto_build_system @en:arm:tqma8mpxs:linux:yocto:how-to
- nel_name="linux-tq_6.12"| fragment_dir="tqma8mpxs_mb-smarc-2-tq-linux/linux-imx-tq/6.6.91+git/build/fragment.cfg"| git_checkout="scarthgap.
- yocto_build_system @en:arm:tqma8xxs:linux:yocto:how-to
- _name="linux-imx-tq_6.6"| fragment_dir="tqma8xqps_mb-smarc-2-tq-linux/linux-imx-tq/6.6.101-r0/fragment.cfg"| git_checkout="scarthgap.TQ.ARM.