Search Results

You can find the results of your search below.

Fulltext results:

data @en:x86:tqmxe39s
75 Hits, Last modified:
iles/products/embedded/manuals/x86/embedded-modul/SMARC/TQMxE39S/EMB_UM_TQMxE39S_EN_Rev0101.pdf|User's Manual TQMxE39S]] [[https://tq-group.... /files/products/embedded/manuals/x86/carrierboard/MB-SMARC-1/EMB_UM_MB-SMARC-1_EN_Rev0100.pdf|User's Manual MB-SMARC-1]] </panel> ====== On-board I2C devices ====== <panel type="info" title="TQMxE39S / MB-SMARC-1" no-body="true"> ^ TQMxE39S ^^^^^^ ^ Bus ... itor | 0x58 | 0x2C | | ^ MB-SMARC-1 ^^^^^^ ^ Bus ^ Destination ^ Function ^
data @en:x86:tqmxe40s
34 Hits, Last modified:
TQMxE40S, all revisions | ^ [c]Mainboard[/c] | MB-SMARC-3, all revisions | ^ Solution || ^ [c]Fix[/c] |... start due to a corrupted BIOS.| ==== I2S Chip on MB-SMARC-3 not supported ==== ^ Details || ^ [c]Issue[/c]... or the used I2S codec chip (TLV320AIC3294) on the MB-SMARC-3 from the chip manufacturer. | ^ Affected Rev... TQMxE40S, all revisions | ^ [c]Mainboard[/c] | MB-SMARC-3, all revisions | ^ Solution || ^ [c]Fix[/c] |
overview @en:x86:tqmxe41s
28 Hits, Last modified:
ucts/embedded/software_drivers/x86/embedded-modul/SMARC/TQMxE41S/UEFI.0102_TQMxE41S_05.46.09.01.04.zip | Download ]]</btn> | | **Rev. 0101** |... ucts/embedded/software_drivers/x86/embedded-modul/SMARC/TQMxE41S/UEFI.0101_TQMxE41S_05.46.09.01.03.zip | Download ]]</btn> | | **Rev. 0100** |... ucts/embedded/software_drivers/x86/embedded-modul/SMARC/TQMxE41S/UEFI.0100_TQMxE41S_05.45.24.04.02.zip | Download ]]</btn>... ert occurs on debug BIOS * Enable DDIB (HDMI on MB-SMARC-2) * Fix long boot time when HDMI plugged (MB-S
how_to @en:x86:tqmxe41s
24 Hits, Last modified:
y be necessary to limit the USB speed of the USB3.1 ports to Gen1 (5Gbit/s). The MB-SMARC-3 is designed for USB3.1 Gen2 with 10Gbit/s, but on other baseboards this speed can cause instability of the USB interface. T... B speed can be limited individually for each USB3.1 port in the UEFI. 1. Boot the system into the BI
how_to @en:x86:tqmxe41m
23 Hits, Last modified:
y be necessary to limit the USB speed of the USB3.1 ports to Gen1 (5Gbit/s). The MB-SMARC-3 is designed for USB3.1 Gen2 with 10Gbit/s, but on other baseboards this speed can cause instability of the USB interface. T... B speed can be limited individually for each USB3.1 port in the UEFI. 1. Boot the system into the BI
overview @en:x86:tqmxe41m
21 Hits, Last modified:
t occurs on debug BIOS * Enable DDIB (HDMI on MB-SMARC-2) * Fix long boot time when HDMI plugged (MB-SMARC-3) * Disable Advanced Boot Option * Define... * Change Default configuration * eMMC 5.1 Controller <Disabled> * USB3.1 Portx Speed Selection [15] * UART0 Controller
bios_update @en:x86:tqmxe39s:bios
6 Hits, Last modified:
date|lang="en"|mod_arch="x86"|mod_name="TQMxE39S"|mb_name="MB-SMARC-1"|bios_image_name="TQMxE39S"|bios_image_version="5... pdate > Enabled)"|bios_update_parameter="–ALL –RA"|bios_jumper_mb="X16/BOOT_SEL2_1V8#"|spi_flash_device="W25Q128FWSIF"|spi_flash_vendor="Winbond"}}
tqmxe40s
4 Hits, Last modified:
duct_type="Embedded Module"|lang="en"|mod_arch="x86"|mod_name="TQMxE40S"|mb_name="MB-SMARC-3"|stk_name="STKxE40S"|qsg_revision="0001"|mod_name_url="tqmxe40s"}}
bios_update @en:x86:tqmxe40s:bios
3 Hits, Last modified:
SPI flash via DIP-Switch S3-3 (BOOT_SEL2) on the MB-SMARC-3. ^ S3-3 (BOOT_SEL2) ^^ ^ Open | BIOS will