Search Results

You can find the results of your search below.

Fulltext results:

deployment_yocto @en:arm:tqma8mpxs:linux:yocto
26 Hits, Last modified:
age> $ sudo dd if=tq-image-weston-debug-tqma8mpxs-mb-smarc-2.rootfs.wic of=/dev/sdc bs=1M conv=fsync #Assuming the SD card is assigned to ... irectory): * Bootstream: ''imx-boot-tqma8mpxs-mb-smarc-2-uuu.bin-flash_spl'' * WIC-Image: ''*.wic'' ... ic.zst'' (e.g., ''tq-image-weston-debug-tqma8mpxs-mb-smarc-2.rootfs.wic.zst'') ==== Prepare Hardware (Seria... he TQMa8MPxS:** <code>sudo uuu imx-boot-tqma8mpxs-mb-smarc-2-uuu.bin-flash_spl</code> </panel> <panel type=
dip_switches @en:arm:tqma8mpxs:mb-smarc-2
17 Hits, Last modified:
====== MB-SMARC-2 DIP switch settings ====== =====Boot Modes===== The following boot modes of the i.MX8X can be selected by the DIP switch S3 on the MB-SMARC-2. <grid> <col sm="2"> <panel type="primary" title="SD-Card"> <WRAP centeralign> [size=150%]**S3**[/size] {{ :en:dip_4_0110.png?nolink&150 |}} </WRAP> </panel> </col> <col sm="2"> <panel
quickstart_yocto @en:arm:tqma8mpxs:linux:yocto
13 Hits, Last modified:
mod_name_a="TQMa8MPxS"| mod_name_b="tqma8mpxs"| mb_name_a="MB-SMARC-2"| machine="tqma8mpxs-mb-smarc-2"| target-machines="++tqma8mpxs-mb-smarc-2 \| TQMa8MPxS on MB-SMARC-2 ++"| default-machine="tqma8mpxs-mb-smarc-2"| uboot_ver="[[https://github.com/tq-systems/u-boot-tqmaxx/tre
yocto_build_system @en:arm:tqma8mpxs:linux:yocto:how-to
11 Hits, Last modified:
nel_name="linux-tq_6.12"| fragment_dir="tqma8mpxs_mb-smarc-2-tq-linux/linux-imx-tq/6.6.91+git/build/fragment.cfg"| git_checkout="scarthgap.
can @en:arm:tqma8mpxs:linux:yocto:how-to
8 Hits, Last modified:
/nav> ---- <panel type="default" title="CAN"> The MB-SMARC-2 provides two CAN interfaces: CAN0 on X29 and CA... oopback"> {{ :en:arm:tqma8mpxs:linux:yocto:how-to:mb-smarc-2_can.png?nolink&400 |}} </panel> </col> </grid> ... -> CAN1 === <code> candump can0& cansend can1 5A1#11.2233.44556677.88 </code> === CAN1 -> CAN0 === <code> candump can1& cansend can0 5A1#11.2233.445566
spi @en:arm:tqma8mpxs:linux:yocto:how-to
8 Hits, Last modified:
SPI_MOSI and SPI_MISO need to be bridged: On MB-SMARC-2 the corresponding pins are pins 15 and 16 on X24. <code> echo -n -e "\x01\x0F" | spi-pipe -d <spi interface> -s 10000000 | hexdump (e.g. echo -n -e "\x01\x0F" | spi-pipe -d /dev/spidev1.0 -s 10000000 | hexdump) </c
machinelearning @en:arm:tqma8mpxs:linux:yocto:how-to
4 Hits, Last modified:
**arch/arm64/boot/dts/freescale/imx8mp-tqma8mpqs-mb-smarc-2.dts**: <code> &ml_vipsi { status = "ok... changing environmentvariable ''USE_GPU_INFERENCE=1''), a ''[query_hardware_caps:66]Unsupported evis