Search Results

Fulltext results:

deployment_yocto

33 Hits, Last modified: 5 days ago

age> $ sudo dd if=tq-image-weston-debug-tqma8xqps-mb-smarc-2.rootfs.wic of=/dev/sdc bs=1M conv=fsync #Assuming the SD card is assigned to ... irectory): * Bootstream: ''imx-boot-tqma8xqps-mb-smarc-2-mfgtool.bin-flash_spl'' * WIC-Image: ''*.wi... ic.zst'' (e.g., ''tq-image-weston-debug-tqma8xqps-mb-smarc-2.rootfs.wic.zst'') ==== Prepare Hardware (Seria... dule. - Set the DIP switch S3 on the mainboard (MB-SMARC-2) as follows: <grid> <col sm="6" xs="12"> <pane

quickstart_yocto

19 Hits, Last modified: 6 days ago

|mod_name_code="tqma8xxs" |mod_name_mtq="TQ.ARM" |mb_name="MB-SMARC-2" |mb_name_code="mb-smarc-2" |bsp_rev="0006" |bsp_notation="BSP.SW" |uboot_version="[[https://github.com/tq-systems/u-bo... mage="tq-image-weston" |mtq_machines="++tqma8xqps-mb-smarc-2\|TQMa8XQPS on MB-SMARC-2++ \\ ++tqma8xdps-mb-smarc-2\|TQMa8XDPS on MB-SMARC-2++" |mtq_machine_default="tqma8xqps-mb-smarc-2" |mtq_repos="//ci-meta-tq//" |dist

target @en:arm:tqma8xxs:linux:yocto:how_to

16 Hits, Last modified: 14 months ago

ion."|microphone="X19"|linein="X17"|lineout="X18"|mb_name="MB-SMARC-2"|audio_image="{{ :en:arm:tqma8xxs:linux:yocto:h... plate>en:templates:howto:can|can_description="The MB-SMARC-2 provides the CAN interfaces CAN0 and CAN1."|dip... ="<device tree>'' (e.g. ''setenv fdt_file imx8qxp-mb-smarc-2-lvds0-tm070jvhg33.dtb'')"}} {{template>en:temp... s:howto:rtc|}} {{template>en:templates:howto:spi|mb_name="MB-SMARC-2"|amountspi="one"|spi_table="\| SPI0\| /dev/spid

yocto_build_system @en:arm:tqma8xxs:linux:yocto:how-to

10 Hits, Last modified: 7 days ago

_name="linux-imx-tq_6.6"| fragment_dir="tqma8xqps_mb-smarc-2-tq-linux/linux-imx-tq/6.6.101-r0/fragment.cfg"| git_checkout="scarthgap.TQ.ARM.

spi @en:arm:tqma8xxs:linux:yocto:how-to

8 Hits, Last modified: 7 days ago

SPI_MOSI and SPI_MISO need to be bridged: On MB-SMARC-2 the corresponding pins are pins 15 and 16 on X24. <code> echo -n -e "\x01\x0F" | spi-pipe -d <spi interface> -s 10000000 | hexdump (e.g. echo -n -e "\x01\x0F" | spi-pipe -d /dev/spidev0.0 -s 10000000 | hexdump) </c

can @en:arm:tqma8xxs:linux:yocto:how-to

6 Hits, Last modified: 7 days ago

/nav> ---- <panel type="default" title="CAN"> The MB-SMARC-2 provides two CAN interfaces: CAN0 and CAN1. <gr... ed to configure CAN0 and CAN1. ^ Function ^ S4-1 ^ S4-2 ^ | CAN-Bus not terminated | OFF | ... ate) | ON | OFF | | CAN-Bus terminated with 120 Ohm | ON | ON | </panel> </col> <col sm="6... -> CAN1 === <code> candump can0& cansend can1 5A1#11.2233.44556677.88 </code> === CAN1 -> CAN0 === <