Search Results
You can find the results of your search below.
Fulltext results:
- data @en:arm:tqma8xxs
- > <accordion> <panel title="TQMa8XxS Rev.03xx / MB-SMARC-2 Rev.01xx"> ^ I2C bus ^ TQMa8XxS ^^^^^^ ^ I2C1 | 0x1... OM | </panel> <panel title="TQMa8XxS Rev.02xx / MB-SMARC-2 Rev.01xx"> ^ I2C bus ^ TQMa8XxS ^^^^^^ ^ I2C1 | 0x1... \ EEPROM | </panel> <panel title="TQMa8XxS Rev.01xx / MB-SMARC-2 Rev.01xx"> ^ I2C bus ^ TQMa8XxS ^^^^^^ ^ I... ta-tq/tree/sumo-tqma8x|sumo-tqma8x]] | tqma8xps-mb-smarc-2\\ tqma8xds-mb-smarc-2 | v2018.03-rel_imx_4.14.98_2.2.0_ga | rel_imx_4.14.98_2.2.0_ga | | [
- deployment_yocto @en:arm:tqma8xxs:linux:yocto
- age> $ sudo dd if=tq-image-weston-debug-tqma8xqps-mb-smarc-2.rootfs.wic of=/dev/sdc bs=1M conv=fsync #Assuming the SD card is assigned to ... irectory): * Bootstream: ''imx-boot-tqma8xqps-mb-smarc-2-mfgtool.bin-flash_spl'' * WIC-Image: ''*.wi... ic.zst'' (e.g., ''tq-image-weston-debug-tqma8xqps-mb-smarc-2.rootfs.wic.zst'') ==== Prepare Hardware (Seria... dule. - Set the DIP switch S3 on the mainboard (MB-SMARC-2) as follows: <grid> <col sm="6" xs="12"> <pane
- deployment_yocto @en:arm:tqma8mpxs:linux:yocto
- age> $ sudo dd if=tq-image-weston-debug-tqma8mpxs-mb-smarc-2.rootfs.wic of=/dev/sdc bs=1M conv=fsync #Assuming the SD card is assigned to ... irectory): * Bootstream: ''imx-boot-tqma8mpxs-mb-smarc-2-uuu.bin-flash_spl'' * WIC-Image: ''*.wic'' ... ic.zst'' (e.g., ''tq-image-weston-debug-tqma8mpxs-mb-smarc-2.rootfs.wic.zst'') ==== Prepare Hardware (Seria... he TQMa8MPxS:** <code>sudo uuu imx-boot-tqma8mpxs-mb-smarc-2-uuu.bin-flash_spl</code> </panel> <panel type=
- deployment_yocto @en:arm:tqma95xxsa:linux:yocto
- $ sudo dd if=tq-image-weston-debug-tqma95xxsa-4gb-mb-smarc-2.rootfs.wic of=/dev/sdc bs=1M conv=fsync #Assuming the SD card is assigned to ... t'' (e.g., ''tq-image-weston-debug-tqma95xxsa-4gb-mb-smarc-2.rootfs.wic.zst'') ==== Prepare Hardware (Seria... dule. - Set the DIP switch S3 on the mainboard (MB-SMARC-2) as follows: <grid> <col sm="6" xs="12"> <pane... a95xxSA:** <code>sudo uuu imx-boot-tqma95xxsa-4gb-mb-smarc-2-sd.bin-flash_a55</code> </panel> <panel type="
- dip_switches @en:arm:tqma95xxsa:mb-smarc-2
- ====== MB-SMARC-2 DIP switch settings ====== =====Boot Modes===== The following boot modes can be selected by the DIP switch S3 on the MB-SMARC-2. <grid> <col sm="4" xs="12"> <panel type="primary" title="SD-Card"> <WRAP centeralign> [size=150%]**S3**[/size] {{ :en:dip_4_0110.png?nolink&150
- quickstart_yocto @en:arm:tqma8xxs:linux:yocto
- |mod_name_code="tqma8xxs" |mod_name_mtq="TQ.ARM" |mb_name="MB-SMARC-2" |mb_name_code="mb-smarc-2" |bsp_rev="0006" |bsp_notation="BSP.SW" |uboot_version="[[https://github.com/tq-systems/u-bo... mage="tq-image-weston" |mtq_machines="++tqma8xqps-mb-smarc-2\|TQMa8XQPS on MB-SMARC-2++ \\ ++tqma8xdps-mb-smarc-2\|TQMa8XDPS on MB-SMARC-2++" |mtq_machine_default="tqma8xqps-mb-smarc-2" |mtq_repos="//ci-meta-tq//" |dist
- dip_switches @en:arm:tqma8mpxs:mb-smarc-2
- ====== MB-SMARC-2 DIP switch settings ====== =====Boot Modes===== The following boot modes of the i.MX8X can be selected by the DIP switch S3 on the MB-SMARC-2. <grid> <col sm="2"> <panel type="primary" title="SD-Card"> <WRAP centeralign> [size=150%]**S3**[/size] {{ :en:dip_4_0110.png?nolink&150 |}} </WRAP> </panel> </col> <col sm="2"> <panel
- dip_switches @en:arm:tqma8xxs:mb-smarc-2
- ====== MB-SMARC-2 DIP switch settings ====== =====Boot Modes===== The following boot modes of the i.MX8X can be selected by the DIP switch S3 on the MB-SMARC-2. <grid> <col sm="2"> <panel type="primary" title="SD-Card"> <WRAP centeralign> [size=150%]**S3**[/size] {{ :en:dip_4_0110.png?nolink&150 |}} </WRAP> </panel> </col> <col sm="2"> <panel
- quickstart_yocto @en:arm:tqma95xxsa:linux:yocto
- od_name_a="TQMa95xxSA"| mod_name_b="tqma95xxsa"| mb_name_a="MB-SMARC-2"| default-machine="tqma95xxsa-4gb-mb-smarc-2"| machine="tqma95xxsa-4gb-mb-smarc-2"| target-machines="++ tqma95xxsa-2gb-mb-smarc-2 \| TQMa95xxSA with 2GB RAM on MB-SMARC-2 ++ \\ ++ tqma95xxsa-4gb-mb-smarc-2 \| TQMa95xxSA wit
- target @en:arm:tqma8xxs:linux:yocto:how_to
- ion."|microphone="X19"|linein="X17"|lineout="X18"|mb_name="MB-SMARC-2"|audio_image="{{ :en:arm:tqma8xxs:linux:yocto:h... plate>en:templates:howto:can|can_description="The MB-SMARC-2 provides the CAN interfaces CAN0 and CAN1."|dip... ="<device tree>'' (e.g. ''setenv fdt_file imx8qxp-mb-smarc-2-lvds0-tm070jvhg33.dtb'')"}} {{template>en:temp... s:howto:rtc|}} {{template>en:templates:howto:spi|mb_name="MB-SMARC-2"|amountspi="one"|spi_table="\| SPI0\| /dev/spid
- quickstart_yocto @en:arm:tqma8mpxs:linux:yocto
- mod_name_a="TQMa8MPxS"| mod_name_b="tqma8mpxs"| mb_name_a="MB-SMARC-2"| machine="tqma8mpxs-mb-smarc-2"| target-machines="++tqma8mpxs-mb-smarc-2 \| TQMa8MPxS on MB-SMARC-2 ++"| default-machine="tqma8mpxs-mb-smarc-2"| uboot_ver="[[https://github.com/tq-systems/u-boot-tqmaxx/tre
- yocto_build_system @en:arm:tqma95xxsa:linux:yocto:how-to
- ame="linux-imx-tq_6.12"| fragment_dir="tqma95xxsa_mb-smarc-2-tq-linux/linux-imx-tq/6.12.55+git/build/fragment.cfg"| git_checkout="scarth
- yocto_build_system @en:arm:tqma8mpxs:linux:yocto:how-to
- nel_name="linux-tq_6.12"| fragment_dir="tqma8mpxs_mb-smarc-2-tq-linux/linux-imx-tq/6.6.91+git/build/fragment.cfg"| git_checkout="scarthgap.
- yocto_build_system @en:arm:tqma8xxs:linux:yocto:how-to
- _name="linux-imx-tq_6.6"| fragment_dir="tqma8xqps_mb-smarc-2-tq-linux/linux-imx-tq/6.6.101-r0/fragment.cfg"| git_checkout="scarthgap.TQ.ARM.
- can @en:arm:tqma8mpxs:linux:yocto:how-to
- /nav> ---- <panel type="default" title="CAN"> The MB-SMARC-2 provides two CAN interfaces: CAN0 on X29 and CA... oopback"> {{ :en:arm:tqma8mpxs:linux:yocto:how-to:mb-smarc-2_can.png?nolink&400 |}} </panel> </col> </grid> ... -> CAN1 === <code> candump can0& cansend can1 5A1#11.2233.44556677.88 </code> === CAN1 -> CAN0 === <code> candump can1& cansend can0 5A1#11.2233.445566