Search

Fulltext results:

how_to

41 Hits, Last modified: 7 months ago

y be necessary to limit the USB speed of the USB3.1 ports to Gen1 (5Gbit/s). The MB-SMARC-3 is designed for USB3.1 Gen2 with 10Gbit/s, but ... ation > USB3.1 Portx Speed Selection 3. Decimal numbers from 0 to 15 can be entered in this field. When this number is converted to binary, each bit represents a USB por... fault): === To enable Gen2 on all USB-Ports, USB3.1 Portx Speed Selection must be set to 0.\\ {{:en:x

overview

32 Hits, Last modified: 4 months ago

://www.tq-group.com/filedownloads/files/products/embedded/software_drivers/x86/embedded-modul/SMARC/TQMxE41S/UEFI.0100_TQMxE41S_05.45.24.04.02.zip | Download ]]</btn> | \\ </p... cordion collapsed="true"> <panel title="UEFI Rev.0100"> * Disable Advanced Boot Option * Define ... t * Change Default configuration * eMMC 5.1 Controller <Disabled> * USB3.1 Portx Speed Selection [15] * UART0 Controller

bios_update

13 Hits, Last modified: 5 months ago

abel> <label mod_name>TQMxE41S</label> <label mb_name>MB-SMARC-3</label> <label bios_image_name>TQMxE41S</label> <label bios_image_version>05.45.24.04.02</labe... e_parameter>–ALL –RA</label> <label bios_jumper_mb> S3-3 (BOOT_SEL2)</label> <label spi_flash_device>MX25U25643G</label> <label spi_flash_vendor>Macronix</label> </embed>