User Tools

Site Tools


vmware.png nfs.png tftp.png subversion.png eclipse.png logo.png tutorial.png

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:arm:tqma35:data [2019/03/13 15:35] (current)
bujupib created
Line 1: Line 1:
 +~~NOCACHE~~
  
 +====== Entry Page ======
 +
 +
 +====== Board Support Packages ======
 +  * [[.:​linux:​overview|Linux (PTXdist)]]
 +  * [[.:​windows:​overview| Windows CE]]
 +
 +
 +
 +====== Hardware ======
 +===== Onboard I2C devices =====
 +
 +
 +
 +====== Hardware Issues ======
 +
 +
 +
 +====== Linux BSP ======
 +===== U-Boot =====
 +**U-Boot 2010.06**
 +
 +==== Features ====
 +^Component ^ Status ^ Remarks ^
 +| CPU              |  +  | i.MX35, silicon rev 2.1 (ARM11) |
 +| Ethernet ​        ​| ​ +\\ +  | 1 x FEC\\ 1 x external SMC911X (MBa35 only) |
 +| USB 2.0          |     | not planned |
 +| eSDHC            |  +\\ +  | SD card\\ eMMC (not for MBa35-CA) |
 +| UART             ​| ​ +  | ttymxc2 for TQMa35-AA and -AB, ttymxc0 for MBa35-CA ​ |
 +| I²C              |  +  |  |
 +| SPI              |     | on request |
 +| <wrap round info>​Key:​ + tested %%|%% - untested %%|%% ? open</​wrap>​ |||
 +
 +
 +
 +===== Kernel =====
 +===== Operating System =====
 +**Linux 3.2.28**
 +
 +**Linux 3.2.40 (Rev.0102)**
 +
 +==== Features ====
 +
 +^ Component ​         ^ Status ​ ^ Remarks ^
 +| CPU              |  +  | i.MX35 rev 2.1 (ARM 11) |
 +| Ethernet ​        ​| ​ +\\ +  | 1 x FEC\\ 1 x external SMC911X (MBa35 only) |
 +| Display ​         |  +  | LVDS on MBa35 only |
 +| Backlight ​       |  +  |  |
 +| USB 2.0          |  +\\ +  | 1 x Host\\ 1 x OTG Host |
 +| eSDHC            |  +  | SD-CARD / eMMC |
 +| GPIO             ​| ​ +  |  |
 +| SPI              |  +  |  |
 +| Touch            |  +  |  |
 +| I²C              |  +  | RTC, EEPROM, GPIO-Expander (MBa35 only), LM75 |
 +| CAN              |  +  |  |
 +| Audio            |  ?  | <wrap round tip>on request</​wrap>​ |
 +| CSI              |  -  | <wrap round tip>on request</​wrap>​ |
 +| <wrap round info>​Key:​ + tested %%|%% - untested %%|%% ? open</​wrap>​ |||
 +
 +==== Root-FS ====
 +
 +** PTXdist 2012.07 (BSP 0102) **
 +
 +** PTXdist 2012.04 (up to BSP 0101) **
 +
 +==== Features ====
 +
 +^ Component ​         ^ Status ^ min. BSP ^ Remarks ^
 +| System ​             |  +  | 0100 | busybox, udev, ... |
 +| utils               ​| ​ +  | 0100 | tftp, ssh, ... |
 +| Display ​            ​| ​ +  | 0100 | fbtest / fbset / fbv | 
 +| Touch (SPI)         ​| ​ +  | 0100 | ts_calibrate / ts_test | 
 +| Audio               ​| ​    ​| ​     | on request | 
 +| CAN                 ​| ​ +  | 0101 | CAN utils | 
 +| USB                 ​| ​ +  | 0100 | usbutils | 
 +| I2C                 ​| ​ +  | 0100 | i2c-tools | 
 +| GUI                 ​| ​ +  | 0101 | Qt 4.8 on request | 
 +| CSI                 ​| ​    ​| ​     | on request |
 +
 +|<wrap round info>​Key:​ + tested %%|%% - untested %%|%% ? open</​wrap>​ |||
 +
 +
 +
 +
 +
 +
 +===== FAQ =====
 +
 +<WRAP round important>​WORK IN PROGRESS</​WRAP>​
 +
 +
 +===== PTXdist =====
 +===== BSP Version Matrix =====
 +
 +
 +
 +===== Changelog PTXdist =====
 +
 +
 +
 +
 +
 +===== DevHost =====
 +
 +
 +
 +===== Compilation =====
 +
 +
 +===== Adapt BSP =====
 +===== Deployment PTXdist =====
 +===== Images PTXdist =====
 +===== Downloads =====
 +===== How-To PTXdist =====
 +===== Known Issues PTXdist =====
 +
 +
 +
 +===== Yocto =====
 +==== DevHost ====
 +==== Build BSP ====
 +==== Adapt BSP ====
 +==== Deployment ====
 +==== Known Issues Yocto ====
 +{{section>​.:​data#​known_issues_ptxdist&​noheader}}
 +===== (Deployment) =====
 +====== QNX BSP ======
 +===== U-Boot =====
 +===== Bootloader =====
 +==== Supported features ====
 +
 +
 + 
 +\\
 +==== Supported boot devices ====
 +
 +
 +===== Operating System =====
 +
 +===== Onboard I2C devices =====
 +
 +===== Kernel =====
 +===== FAQ =====
 +===== Deployment =====
 +====== VxWorks BSP ======
 +===== U-Boot =====
 +===== Kernel =====
 +===== FAQ =====
 +===== Deployment =====

en/arm/tqma35/data.txt · Last modified: 2019/03/13 15:35 by bujupib


Disclaimer

TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.


Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
Recent changes RSS feed Valid XHTML 1.0 Valid CSS Driven by DokuWiki