Linux 3.9 (BSP 0105)

Linux 3.5 (up to BSP 0104)

Device Component Status Version BSP rev. Remarks
i.MX53 CPU + 3.5 / 3.9 0100 i.MX53 rev 2.1 (Cortex®-A8)
Ethernet (FEC) + 3.5 / 3.9 0100
DVI Display + 3.5 / 3.9 * 0101 for Rev 0102 see here for a fix
LVDS Display + 3.5 / 3.9 * 0101 see Change from DVI to LVDS output
Output clone only
parallel Display + 3.5 / 3.9 * 0101 see Change from DVI to parallel LCD
VGA + 3.9 * 0105 see Change from DVI to VGA
USB 2.0 + 3.5 / 3.9 * 0102 OTG Host, see howto configure OTG port
eSDHC + 3.5 / 3.9 0101 SD-CARD / eMMC
SATA + 3.9 0105 only with u-boot
GPIO + 3.5 / 3.9 0100
SPI + 3.5 / 3.9 0102 known to be work on customized base boards
UART + 3.5 / 3.9 0100
I²C + 3.5 / 3.9 0100 EEPROM, Temprature sensor, GPIO expander
CAN + 3.5 / 3.9 0101
Audio + 3.5 / 3.9 0103 SDMA firmware needed, see here
RTC (PMIC) + 3.9 * 0105
Touch (PMIC) + 3.9 * 0105
Touch (RS232 / USB) + 3.5 / 3.9 0102
GPU + 3.5 / 3.9 * 0104 tested with Freescale binaries, see here
VPU + 3.9 * 0105 CODA firmware needed, see here
CSI $ on request
EIM $ on request
tested on custom mainboard with 16 bit SRAM
MBa53(LAN9514) Ethernet + 3.9 0105 automatic MAC configuration not implemented
USB 2.0 + 3.5 / 3.9 * 0102 2 x Host
Key: + tested | - untested | ? open | * patches in BSP | $ on request

Rev 0105

  • Feature: linux 3.9
  • Feature: Touch / RTC (PMIC MC13708)
  • Feature: VPU
  • Feature: VGA
  • Feature: Dual LVDS (only display cloning)
  • Feature: SATA

Rev 0104

  • Feature: GPU support
  • Reenable dvi as default setting

Rev 0103

  • Feature: Audio support

Rev 0102

  • Feature: USB support
  • Feature: fix SD-card enumeration order based on controller ID
  • Feature: disable framebuffer console to prevent display deactivation

Rev 0101

  • Update to linux 3.5
  • Feature: device tree support
  • Last modified: 2022/08/04 15:02