Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		 Previous revision
en:templates:meta-tq_qs_tqma57xx [2018/08/07 18:54] – created liedmannen:templates:meta-tq_qs_tqma57xx [2022/08/04 15:02] (current) – external edit 127.0.0.1
Line 6: Line 6:
 The //meta-tq// layer extends the //Yocto Project's// reference system //Poky// to provide support for a selection of TQ Embedded CPU Modules, including the <label mod_name>MOD_NAME</label>. The //meta-tq// layer extends the //Yocto Project's// reference system //Poky// to provide support for a selection of TQ Embedded CPU Modules, including the <label mod_name>MOD_NAME</label>.
  
-It uses the same codebase as the [[..:arm:<label mod_name>MOD_NAME</label>:linux:overview|PTXdist based TQ Linux BSPs]] and therefore provides the same versions of U-Boot and Linux kernel, but doesn't define a specific root filesystem configuration.+It uses the same codebase as the [[..:arm:<label mod_name>MOD_NAME</label>:linux:ptxdist:overview|PTXdist based TQ Linux BSPs]] and therefore provides the same versions of U-Boot and Linux kernel, but doesn't define a specific root filesystem configuration.
  
 The instructions on this page refer to the BSP and ancillary tools listed in the following table: The instructions on this page refer to the BSP and ancillary tools listed in the following table:
  
-^ BSP Revision((refers to the revision of the [[..:arm:<label mod_name>MOD_NAME</label>:linux:overview|PTXdist based TQ Linux BSP]], which provides the codebase of U-Boot and Linux kernel))  ^  <label bsp_rev>BSP_REV</label>  ^ +^ BSP Revision((refers to the revision of the [[..:arm:<label mod_name>MOD_NAME</label>:linux:ptxdist:overview|PTXdist based TQ Linux BSP]], which provides the codebase of U-Boot and Linux kernel))  ^  <label bsp_rev>BSP_REV</label>  ^ 
-^ ++meta-tq release|\\ [[https://github.com/tq-systems/meta-tq/releases|all releases]]++  |  [[https://github.com/tq-systems/meta-tq/releases/tag/<label mod_name>MOD_NAME</label>.BSP.SW.<label mtq_reltag>META-TQ_RELTAG</label>|<label mod_name>MOD_NAME</label>.BSP.SW.<label mtq_reltag>META-TQ_RELTAG</label>]]  |+^ ++meta-tq release|\\ [[https://github.com/tq-systems/meta-tq/releases|all releases]]++  |  [[https://github.com/tq-systems/meta-tq/releases/tag/<label yocto_rel_branch>YOCTO_REL_BRANCH</label>.<label mod_name_mtq>MOD_NAME_MTQ</label>.BSP.SW.<label bsp_rev>BSP_REV</label>|<label yocto_rel_branch>YOCTO_REL_BRANCH</label>.<label mod_name_mtq>MOD_NAME_MTQ</label>.BSP.SW.<label bsp_rev>BSP_REV</label>]]  |
 ^ Yocto Project / Poky Release  |  ++<label yocto_rel_ver_major>YOCTO_REL_VER_MAJOR</label>.<label yocto_rel_ver_minor>YOCTO_REL_VER_MINOR</label> - <label yocto_rel_name>YOCTO_REL_NAME</label>|\\ ''git clone -b <label yocto_rel_branch>YOCTO_REL_BRANCH</label> git:%%//%%git.yoctoproject.org%%/%%poky.git''\\ [[http://<label yocto_rel_base_url>YOCTO_REL_BASE_URL</label>/yocto-<label yocto_rel_ver_major>YOCTO_REL_VER_MAJOR</label>/<label yocto_rel_tarball>YOCTO_REL_TARBALL</label>|<label yocto_rel_tarball>YOCTO_REL_TARBALL</label>]]++  | ^ Yocto Project / Poky Release  |  ++<label yocto_rel_ver_major>YOCTO_REL_VER_MAJOR</label>.<label yocto_rel_ver_minor>YOCTO_REL_VER_MINOR</label> - <label yocto_rel_name>YOCTO_REL_NAME</label>|\\ ''git clone -b <label yocto_rel_branch>YOCTO_REL_BRANCH</label> git:%%//%%git.yoctoproject.org%%/%%poky.git''\\ [[http://<label yocto_rel_base_url>YOCTO_REL_BASE_URL</label>/yocto-<label yocto_rel_ver_major>YOCTO_REL_VER_MAJOR</label>/<label yocto_rel_tarball>YOCTO_REL_TARBALL</label>|<label yocto_rel_tarball>YOCTO_REL_TARBALL</label>]]++  |
-^ Target machine((i.e. value for [[http://<label yocto_doc_base_url>YOCTO_DOC_BASE_URL</label>/<label yocto_rel_ver_major>YOCTO_REL_VER_MAJOR</label>.<label yocto_rel_ver_minor>YOCTO_REL_VER_MINOR</label>/ref-manual/ref-manual.html#var-MACHINE|MACHINE]] variable))  |  <label mod_name_code>MOD_NAME_CODE</label>-<label mb_name_code>MB_NAME_CODE</label>  |+^ Target machine((i.e. value for [[http://<label yocto_doc_base_url>YOCTO_DOC_BASE_URL</label>/<label yocto_rel_ver_major>YOCTO_REL_VER_MAJOR</label>.<label yocto_rel_ver_minor>YOCTO_REL_VER_MINOR</label>/ref-manual/ref-manual.html#var-MACHINE|MACHINE]] variable))  |  <label mtq_machines>MTQ_MACHINES</label>  |
 ^ U-Boot  |  <label uboot_version>UBOOT_VERSION</label>  | ^ U-Boot  |  <label uboot_version>UBOOT_VERSION</label>  |
 ^ Linux Kernel  |  <label linux_kernel>LINUX_KERNEL</label>  | ^ Linux Kernel  |  <label linux_kernel>LINUX_KERNEL</label>  |
Line 43: Line 43:
 | [[http://<label yocto_doc_base_url>YOCTO_DOC_BASE_URL</label>/<label yocto_rel_ver_major>YOCTO_REL_VER_MAJOR</label>.<label yocto_rel_ver_minor>YOCTO_REL_VER_MINOR</label>/yocto-project-qs/yocto-project-qs.html#welcome|Welcome!]]  | <wrap info round>Introduction and basic information about the //Yocto Project//</wrap>  | | [[http://<label yocto_doc_base_url>YOCTO_DOC_BASE_URL</label>/<label yocto_rel_ver_major>YOCTO_REL_VER_MAJOR</label>.<label yocto_rel_ver_minor>YOCTO_REL_VER_MINOR</label>/yocto-project-qs/yocto-project-qs.html#welcome|Welcome!]]  | <wrap info round>Introduction and basic information about the //Yocto Project//</wrap>  |
 | [[http://<label yocto_doc_base_url>YOCTO_DOC_BASE_URL</label>/<label yocto_rel_ver_major>YOCTO_REL_VER_MAJOR</label>.<label yocto_rel_ver_minor>YOCTO_REL_VER_MINOR</label>/yocto-project-qs/yocto-project-qs.html#yp-intro|Introducing the Yocto Project Development Environment]]  | :::  | | [[http://<label yocto_doc_base_url>YOCTO_DOC_BASE_URL</label>/<label yocto_rel_ver_major>YOCTO_REL_VER_MAJOR</label>.<label yocto_rel_ver_minor>YOCTO_REL_VER_MINOR</label>/yocto-project-qs/yocto-project-qs.html#yp-intro|Introducing the Yocto Project Development Environment]]  | :::  |
-| [[http://<label yocto_doc_base_url>YOCTO_DOC_BASE_URL</label>/<label yocto_rel_ver_major>YOCTO_REL_VER_MAJOR</label>.<label yocto_rel_ver_minor>YOCTO_REL_VER_MINOR</label>/yocto-project-qs/yocto-project-qs.html#yp-resources|Setting Up to Use the Yocto Project]]  | <wrap info round>Description of basic requirements for using the //Yocto Project// (also cf. [[..:arm:<label mod_name>MOD_NAME</label>:yocto:meta-tq_qs#Prerequisites]] above)</wrap>  |+| [[http://<label yocto_doc_base_url>YOCTO_DOC_BASE_URL</label>/<label yocto_rel_ver_major>YOCTO_REL_VER_MAJOR</label>.<label yocto_rel_ver_minor>YOCTO_REL_VER_MINOR</label>/yocto-project-qs/yocto-project-qs.html#yp-resources|Setting Up to use the Yocto Project]]  | <wrap info round>Description of basic requirements for using the //Yocto Project// (also cf. [[..:arm:<label mod_name>MOD_NAME</label>:linux:yocto:quickstart_yocto#Prerequisites]] above)</wrap>  |
 | [[http://<label yocto_doc_base_url>YOCTO_DOC_BASE_URL</label>/<label yocto_rel_ver_major>YOCTO_REL_VER_MAJOR</label>.<label yocto_rel_ver_minor>YOCTO_REL_VER_MINOR</label>/yocto-project-qs/yocto-project-qs.html#releases|Yocto Project Release]]  | <wrap info round>Instructions on how to install a release of the //Yocto Project// on the Build Host</wrap>\\ \\ <WRAP alert round> | [[http://<label yocto_doc_base_url>YOCTO_DOC_BASE_URL</label>/<label yocto_rel_ver_major>YOCTO_REL_VER_MAJOR</label>.<label yocto_rel_ver_minor>YOCTO_REL_VER_MINOR</label>/yocto-project-qs/yocto-project-qs.html#releases|Yocto Project Release]]  | <wrap info round>Instructions on how to install a release of the //Yocto Project// on the Build Host</wrap>\\ \\ <WRAP alert round>
 <code> <code>
Line 76: Line 76:
 </WRAP><WRAP block> </WRAP><WRAP block>
 ==== Building an Image for Hardware ==== ==== Building an Image for Hardware ====
-1. Create a Local Copy of the //meta-tq// Repository:+1. Create a Local Copy of <label mtq_repos>MTQ_REPOS</label>
 <code> <code>
 $ cd $HOME/poky $ cd $HOME/poky
-$ git clone -b <label yocto_rel_branch>YOCTO_REL_BRANCH</label> https://github.com/tq-systems/meta-tq.git+$ git clone -b <label yocto_rel_branch>YOCTO_REL_BRANCH</label><label yocto_rel_branch_module>YOCTO_REL_BRANCH_MODULE</label> https://github.com/tq-systems/meta-tq.git
 </code> </code>
-2. Configure the Build:+3. Initialize the Build Environment: 
 +<code> 
 +$ source oe-init-build-env 
 +</code> 
 +3. Configure the Build((valid machines are\\ <label mtq_machines>MTQ_MACHINES</label>)):
 <code> <code>
 $ cd $HOME/poky/build $ cd $HOME/poky/build
 $ bitbake-layers add-layer "../meta-tq" $ bitbake-layers add-layer "../meta-tq"
-$ echo 'MACHINE = "<label mod_name_code>MOD_NAME_CODE</label>-<label mb_name_code>MB_NAME_CODE</label>"' >> conf/local.conf+$ bitbake-layers add-layer "../meta-ti" 
 +$ echo 'MACHINE = "<label mtq_machine_default>MTQ_MACHINE_DEFAULT</label>"' >> conf/local.conf
 </code> </code>
-3. Build an Image for <label stk_name>STK_NAME</label>:+4. Build an Image for <label stk_name>STK_NAME</label>:
 <code> <code>
-$ bitbake core-image-minimal+$ bitbake <label mtq_image>MTQ_IMAGE</label>
 </code> </code>
-<wrap help round center 80%>The resulting image is ''tmp/deploy/images/<label mod_name_code>MOD_NAME_CODE</label>-<label mb_name_code>MB_NAME_CODE</label>/core-image-minimal-<label mod_name_code>MOD_NAME_CODE</label>-<label mb_name_code>MB_NAME_CODE</label>.wic''</wrap>\\  +<wrap help round center 80%>The resulting image is ''tmp/deploy/images/<label mtq_machine_default>MTQ_MACHINE_DEFAULT</label>((valid machines are\\ <label mtq_machines>MTQ_MACHINES</label>))/<label mtq_image>MTQ_IMAGE</label>-<label mtq_machine_default>MTQ_MACHINE_DEFAULT</label>((valid machines are\\ <label mtq_machines>MTQ_MACHINES</label>)).wic''</wrap>\\  
-4. Write the Image((''TARGET_DEVICE'' has to be an SD card))+5. Write the Image((valid machines are\\ <label mtq_machines>MTQ_MACHINES</label>))((''TARGET_DEVICE'' has to be an SD card))
 <code> <code>
-$ sudo dd if=tmp/deploy/images/<label mod_name_code>MOD_NAME_CODE</label>-<label mb_name_code>MB_NAME_CODE</label>/core-image-minimal-<label mod_name_code>MOD_NAME_CODE</label>-<label mb_name_code>MB_NAME_CODE</label>.wic of=TARGET_DEVICE+$ sudo dd if=tmp/deploy/images/<label mtq_machine_default>MTQ_MACHINE_DEFAULT</label>/<label mtq_image>MTQ_IMAGE</label>-<label mtq_machine_default>MTQ_MACHINE_DEFAULT</label>.wic of=TARGET_DEVICE
 </code> </code>
-5. Boot the <label stk_name>STK_NAME</label> from SD card (cf. [[..:arm:<label mod_name>MOD_NAME</label>:<label mb_name_code>MB_NAME_CODE</label>:dip_switches|<label mb_name>MB_NAME</label> DIP switche settings]])+6. Boot the <label stk_name>STK_NAME</label> from SD card (cf. [[..:arm:<label mod_name>MOD_NAME</label>:<label mb_name_code>MB_NAME_CODE</label>:dip_switches|<label mb_name>MB_NAME</label> DIP switch settings]])
 </WRAP>  | </WRAP>  |
  • Last modified: 2022/08/04 15:04