User Tools

Site Tools


vmware.png nfs.png tftp.png subversion.png eclipse.png logo.png tutorial.png

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
en:x86:tqmx70eb:bios_overview [2018/09/12 10:29]
schmid created
en:x86:tqmx70eb:bios_overview [2018/09/14 09:01] (current)
schmid added Version .01
Line 1: Line 1:
-test+^  BIOS Revision ​ ^  ME Firmware Version ​ ^  Chipset ​ ^  PCI Configurations ​ ^  BIOS Binary ​ ^ 
 +|  **5.12.09.53.15** ​ |  11.8.55.3510 ​ |  CM238  |  8x1 PCIe Lanes  | TQMx60_70EB_5.12.09.53.15.bin ​ | 
 +^  ^^^^^ 
 +|  **5.12.09.44.13** ​ |  11.8.50.3434 ​ |  CM238  |  8x1 PCIe Lanes  | TQMx60_70EB_5.12.09.44.13_cm238.bin ​ | 
 +|  :::  |  :::  |  :::  |  2x4 PCIe Lanes  | TQMx60_70EB_5.12.09.44.13_cm238_PCIe_2x4.bin ​ | 
 +^  ^^^^^ 
 +|  **5.11.51.0024.01** ​ |  11.6.13.1212 ​ |  CM238  |  8x1 PCIe Lanes  | TQMx70EB_05.11.51.0024.01.bin ​ | 
 + 
 +===== Changelog ===== 
 + 
 +++++ 5.12.09.53.15 | 
 +  * Insyde core update to tag 05.12.09.0053 / Close security gap Spectre Variant 2, 3a and 4 
 +  * add ME FW ME_11.8_Corporate_11.8.55.3510 
 +  * enable Usage of SPI Flashes not listed 
 +  * hide EC version  
 +  * hide Fab ID 
 +  * adapt LCD control shown in SCU 
 +  * integrate H2OUVE support 
 + 
 +++++ 
 +++++ 5.12.09.44.13 | 
 +  * Insyde core update to tag 05.12.09.0044 
 +  * add PEG PCI Express configuration menu 
 +  * add ME FW ME_11.8_Corporate_11.8.50.3434 (close security gap) 
 +  * add ME FW ME_11.8_Consumer_11.8.50.3434 
 +  * add support for SPI flash GD 25Q127C 
 +  * fix wrong negative temperature shown in HWM 
 +  * hide Fahrenheit temperature shown in HWM 
 +  * use Insyde function for 3 x reset processing 
 +  * fix no DP output with Xeon CPU with GT2 graphic  
 +  * add UEFI-LVDS functunality 
 +  * correct LVDS resolutions in setup menu 
 +  * Correct SMBIOS data 
 +  * add GPIO/​SD-Card information in SioTqmx86 driver 
 +  * add eDP to LVDS bridge information in SioTqmx86 driver 
 +  * change to UEFI Boot Type by default 
 +  * Make IRQ 5, 6 and 7 for COMs in SioTqmx86 driver adjustable 
 +  * Do not suppress LCD Control when UEFI Boot Type 
 +  * adapt VBIOS and GOP configuration 
 +  * Add Consumer ME Firmware (for HM170) 
 +  * Add Chipset SKU HM170 (for HM170) 
 +  * Add Chipset SKU CM238 (for CM238) 
 +  * SioNct7802y:​ Implement fan scaling configuration 
 +  * SioNct7802y:​ add menu to configure fan PWM frequency 
 +  * fix not working eDP Display 
 +++++ 
 + 
 +++++ 5.11.51.0024.01 | 
 +  * Insyde 05.11.51.0024 
 +  * Corporate ME (CM238): 11.6.13.1212 
 +  * updated BIOS setup defaults 
 +  * simplify/​clean-up setup menu 
 +  * adapt SioTqmx86Pkg to TQMx70EB 
 +  * adapt SioNct7802yPkg to TQMx70EB 
 +  * disable LVDS bridge hard by pin 
 +  * add menu to configure PWM frequency 
 +  * fix no DP output with Xeon CPU with GT2 graphic 
 +  * modify VBIOS and GOP configuration 
 +  * reserve some IRQs 
 +  * add support for EXAR XR28V382 dual UART SIO 
 +  * add support for XEON cpu with GT2 graphic 
 +  * remove MEBx front page icon/​support 
 +  * fix lost setup values if CMOS is lost 
 +  * add USB touch support 
 +  * remove thunderbolt support 
 +  * add verb table for ALC262 codec on COME6-2 board 
 +  * switch from textual form browser to "​normal"​ look & feel 
 +  * console redirection disabled by default 
 +  * TQ boot logo 
 +  * remove LPC decode range 0x0680...0x068F 
 +  * remove LPC decode range 0x1640...0x164F 
 +  * disable SioNct6776fPkg 
 +  * Enable build time flag in BIOS setup menu 
 +  * Enable snap-screen support 
 +  * Switch from debug to release version 
 +  * Start new revision .01 
 +  * Set Release Date  
 +++++

en/x86/tqmx70eb/bios_overview.1536740965.txt.gz · Last modified: 2018/09/12 10:29 by schmid


Disclaimer

TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.


Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
Recent changes RSS feed Valid XHTML 1.0 Valid CSS Driven by DokuWiki