BIOS Overview

BIOS Revision BIOS Version TXE Firmware Version PCI Configurations BIOS Binary
Rev. 0107 5.12.30.28.30 3.1.50.2317 4×1 PCIe Lanes TQMxE39M_5.12.30.28.30.bin
1×2 + 2×1 PCIe Lanes TQMxE39M_5.12.30.28.30_PCIe_1x22x1.bin
1×4 PCIe Lanes TQMxE39M_5.12.30.28.30_PCIe_1x4.bin
Rev. 0106 5.12.30.28.22 3.1.50.2317 4×1 PCIe Lanes TQMxE39M_5.12.30.28.22.bin
1×2 + 2×1 PCIe Lanes TQMxE39M_5.12.30.28.22_PCIe_1x22x1.bin
Rev. 0105 5.12.30.21.20 3.1.50.2238 4×1 PCIe Lanes TQMxE39M_5.12.30.21.20.bin
1×4 PCIe Lanes TQMxE39M_5.12.30.21.20_PCIe_1x4.bin
1×2 + 2×1 PCIe Lanes TQMxE39M_5.12.30.21.20_PCIe_1x22x1.bin
Rev. 0104 5.12.30.21.18 3.1.50.2238 4×1 PCIe Lanes TQMxE39M_5.12.30.21.18.bin
1×4 PCIe Lanes TQMxE39M_5.12.30.21.18_PCIe_1x4.bin
1×2 + 2×1 PCIe Lanes TQMxE39M_5.12.30.21.18_PCIe_1x22x1.bin
Rev. 0103 5.12.30.21.12 3.1.50.2238 4×1 PCIe Lanes TQMxE39M_5.12.30.21.12.bin
1×4 PCIe Lanes TQMxE39M_5.12.30.21.12_PCIe_1x4.bin
1×2 + 2×1 PCIe Lanes TQMxE39M_5.12.30.21.12_PCIe_1x22x1.bin
Rev. 0102 5.12.09.16.07 3.1.50.2222 4×1 PCIe Lanes TQMxE39M_5.12.09.16.07.bin
1×4 PCIe Lanes TQMxE39M_5.12.09.16.07_PCIe_1x4.bin
1×2 + 2×1 PCIe Lanes TQMxE39M_5.12.09.16.07_PCIe_1x22x1.bin
Rev. 0101 5.12.09.16.05 3.0.20.1139 4×1 PCIe Lanes TQMxE39M_5.12.09.16.05.bin
1×4 PCIe Lanes TQMxE39M_5.12.09.16.05_PCIe_1x4.bin
1×2 + 2×1 PCIe Lanes TQMxE39M_5.12.09.16.05_PCIe_1x22x1.bin
Rev. 0100 5.11.47.13.04 3.0.11.1131 4×1 PCIe Lanes TQMxE39M_5.11.47.13.04_release.bin
1×4 PCIe Lanes TQMxE39M_5.11.47.13.04_release_pcie1x4.bin
1×2 + 2×1 PCIe Lanes TQMxE39M_5.11.47.13.04_release_pcie1x2_2x1.bin

Changelog

5.12.30.28.30

  • update H2OUVE package to tag 05.31.28
  • add eMMC selection mode
  • add new SD-MMC driver 1930

5.12.30.28.22

  • core update to tag_05.12.30.0028
    • Update SIC code to 1.1.1
    • improve realtime behavior

5.12.30.21.18

  • Add Smart Battery Switch in BIOS Menu
  • Support F1-Stepping:
    • Update PMC Version
    • Update Microcode
    • Update SIC Version
    • Update GPIO configuration to fix SD-Card functionality

5.12.30.21.12

  • core update to tag_05.12.30.0021
    • close security gap spectre variant 2, 3a and 4
    • fix 'State after G3' issue
    • fix USB 3.0 not working
  • adapt setup menu
    • unhide “OS Reset Select”
    • hide “BIOS Boot Source” information
  • fix H2OUVE default bug of LFP configuration
  • integrate MRC patch to fix ECC issue (stop booting with postcode 30)
  • use old InsydeCrPkg to fix boot stop with postcode 0x0C84 or 0x004D
  • fix not working SPI flash GD 25LQ128D
  • support coinless Apl-I BIOS
  • support Smart Battery

5.12.09.16.07

  • enable all PCIe Root Ports
  • integrate new TXE FW 3.1.50.2222
  • Fix wrong negative temperature values
  • Correct temperature string
  • add UEFI-LVDS and adapt to TQMxE39M
  • Adapt setup menu
    • Unhide “Wake On PME”
    • Unhide “DTS”

5.12.09.16.05

  • update to Insyde BIOS 05.12.09.0016
  • update setup defaults (Memory Scrambler > disabled)
  • adapt setup menu: hide more menus
  • fix not working Single Power Button Event
  • Implement fan scaling configuration
  • update SioNct7802y package supporting Form Browser
  • support form browser
  • make IRQ 5, 6 and 7 adjustable
  • fix not booting from external flash
  • GPIO configuration were adapted to increase lifetime of pins
  • fix not working Console Redirection

5.11.47.13.04

  • update to Insyde BIOS 05.11.47.0013
  • update setup defaults
    • PCI Express Root Port 1 enabled
    • PCI Express Root Port 2 disabled (not connected on TQMxE39M)
    • PCI Express Root Port 3 enabled
    • PCI Express Root Port 4 enabled
    • PCI Express Root Port 5 enabled
    • PCI Express Root Port 6 disabled (only four PCIe ports are allowed at a time)
    • TPM Configuration fTPM
    • HD-Audio DSP disabled
    • Minimum Refresh Rate of 2x enabled
  • adapt PCIe CLKREQ routing configuration to TQMxE39M
  • print full MRC version information in setup main page
  • use OemSvcLoadDefaultSetupMenu for 3 x reset processing (no functional change)
  • fix not shown “press ESC for boot options”
  • fix not working Single Power Button Event
  • fix buffer not freed bug in CPLD driver (no functional change)
  • change look of memory channel information in setup main page
  • add GPIO/SD-Card and eDP to LVDS bridge information to TQMx86 setup page
  • add menu to configure fan PWM frequency to hardware monitor setup page
  • fix shown built-in display on Linux while LFP is disabled in BIOS
  • adapt setup menu: hide more menus
  • fix not working LVDS/eDP in GOP mode
  • fix GOP configuration
  • GPIO - fix LVDS backlight control not working under Windows
  • fix Win10 installation not working
  • NORTHWEST and SOUTHWEST GPIO configurations were adapted
  • switch ModPhyLane4 from USB to PCIe in TXE/SMIP configuration
  • change SPI clock to 50MHz, enable fast read support
  • do not use form browser
  • disable console redirection support
  • add TQ boot logo
  • adapt GOP and VBIOS configuration