STKa62xx Boot Device Selection (S4, S5, S6, S7)
The following boot modes can be configured by setting the DIP switches S4, S5, S6, S7 on the MBa62xx.
SD-Card
S4
S5
S6
S7
eMMC
S4
S5
S6
S7
QSPI-NOR
S4
S5
S6
S7
STKa62xx Functional DIP Switches
CAN0 configuration (S9)
DIP switch S9 is used to configure the CAN interfaces CAN0.
| Funktion | S9-1 | S9-2 |
|---|---|---|
| CAN-Bus not terminated | OFF | OFF |
| not defined (illegal state) | OFF | ON |
| not defined (illegal state) | ON | OFF |
| CAN-Bus terminated with 120 Ohm | ON | ON |
CAN1 configuration (S10)
DIP switch S10 is used to configure the CAN interfaces CAN1.
| Funktion | S10-1 | S10-2 |
|---|---|---|
| CAN-Bus not terminated | OFF | OFF |
| not defined (illegal state) | OFF | ON |
| not defined (illegal state) | ON | OFF |
| CAN-Bus terminated with 120 Ohm | ON | ON |