en

User Tools

Site Tools


vmware.png nfs.png tftp.png subversion.png eclipse.png logo.png tutorial.png

Bootloader

Supported Features

Feature BSP Revision Remarks
TQ Product Chip Interface Function 100 101 102 106 109 115 117 119
TQMa28 i.MX28 CPU i.MX287, i.MX283
EMI DDR2 SDRAM
SSP0 eMMC boot device
SSP1 SD card boot device
I2C0 Bus access intended for customer use
I2C1 Bus access
I2C1 LM73
M24C64
OCOTP
AUART3 RS232 RX/TX/RTS/CTS, TTL available on X14
ENET-MAC0 10 Mbps and 100 Mbps Ethernet/IEEE 802.3
ENET-MAC1 10 Mbps and 100 Mbps Ethernet/IEEE 802.3
LM73 I2C Temperature sensor
M24C64 I2C EEPROM
MBa28 LM73 Temperature sensor

Above table primarily applies to platform tqma28, please see changelog in tab “Bootloader” for details on differences to platform tqma28-fsl



en/arm/tqma28/linux/ptxdist/boot_loader.txt · Last modified: 2019/01/24 18:38 by liedmann


Disclaimer

TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.


Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
Recent changes RSS feed Valid XHTML 1.0 Valid CSS Driven by DokuWiki