Select one of the supported hardware platforms, select a software configuration and start building the image.

The available hardware platforms for TQMa28 are:

  • configs/platforms/tqma28/tqma28-fsl/platformconfig (TQMa28 on MBa28 with u-boot 2009.08, kernel 2.6.35 and Freescale patches)
  • configs/platforms/tqma28/tqma28/platformconfig (TQMa28 on MBa28 on a mainline u-boot 2015.07 and kernel 3.14)

Currently the following software configurations are available:

  • configs/systems/minimal/ptxconfig (minimal rootfs with busybox)
  • configs/systems/qt/ptxconfig (rootfs with busybox and qt)

Building the BSP for tqma28 BSP REV.0115 (and ealier) : 

$ ptxdist platform configs/platforms/tqma28/tqma28/platformconfig
$ ptxdist select configs/systems/minimal/ptxconfig
$ ptxdist go --git
$ ptxdist images

Building the BSP for tqma28 BSP REV.0117 (and later) : 

$ tools/config-tqma28.qt4

this will effectivly:

  • check for configured ptxdist version
  • create symlink to configured ptxdist version (./p → /usr/local/bin/ptxdist-<version>)
  • call ./p platform 'configs/platforms/tqma28/tqma28/platformconfig' * call ./p select configs/systems/qt/ptxconfig * call ./p select configs/platforms/tqma28/ptxcollection.tqma28''

Finally you can build the BSP by executing 

$ ./p images --git

Building the BSP for tqma28-fsl (up to BSP REV.0109): 

$ ptxdist platform configs/platforms/tqma28/tqma28-fsl/platformconfig
$ ptxdist select configs/platforms/tqma28/tqma28-fsl/ptxconfig
$ ptxdist go --git
$ ptxdist images
  • Last modified: 2022/08/04 15:02