Embedded module TQMa35 - Linux BSP documentation

Important Notes

Pengutronix has released new versions of their OSELAS Toolchains, which fix the CVE-2015-7547 --- glibc getaddrinfo() stack-based buffer overflow issue:

TQ strongly recommends to switch your PTXdist based BSP(s) to one of the above mentioned (or later) OSELAS toolchains.

For deployed systems with network connectivity, an update should be taken into consideration!

Step-by-step instructions to switch your BSP to a new toolchain

1. Build the new OSELAS toolchain

Choose the new toolchain version, which fits best and build it according to the Application Note: Building OSELAS.Toolchains().

2. Reconfigure your BSP / platform

Navigate to

architecture -->  toolchain -->

and modify the following options

(OSELAS.Toolchain-YYYY.MM.P) check for specific toolchain vendor
(MAJOR.MINOR[.PATCH]) check for specific glibc version

to match the version information for the toochain you built in the first step.

Exit PTXdist and make sure your changes are saved.
To make PTXdist use the new toolchain for your BSP / platform execute
```
ptxdist toolchain <path to the new toolchain>
```

3. Rebuild your BSP

U-Boot 2010.06

Component	Status	Remarks
CPU	+	i.MX35, silicon rev 2.1 (Arm1136JF-S^™)
Ethernet	+ +	1 x FEC 1 x external SMC911X (MBa35 only)
USB 2.0		not planned
eSDHC	+ +	SD card eMMC (not for MBa35-CA)
UART	+	ttymxc2 for TQMa35-AA and -AB, ttymxc0 for MBa35-CA
I²C	+
SPI		on request
Key: + tested \| - untested \| ? open

Linux 3.2.28

Linux 3.2.40 (Rev.0102)

Component	Status	Remarks
CPU	+	i.MX35 rev 2.1 (Arm1136JF-S^™)
Ethernet	+ +	1 x FEC 1 x external SMC911X (MBa35 only)
Display	+	LVDS on MBa35 only
Backlight	+
USB 2.0	+ +	1 x Host 1 x OTG Host
eSDHC	+	SD-CARD / eMMC
GPIO	+
SPI	+
Touch	+
I²C	+	RTC, EEPROM, GPIO-Expander (MBa35 only), LM75
CAN	+
Audio	?	on request
CSI	-	on request
Key: + tested \| - untested \| ? open

PTXdist 2012.07 (BSP 0102)

PTXdist 2012.04 (up to BSP 0101)

Component	Status	min. BSP	Remarks
System	+	0100	busybox, udev, …
utils	+	0100	tftp, ssh, …
Display	+	0100	fbtest / fbset / fbv
Touch (SPI)	+	0100	ts_calibrate / ts_test
Audio			on request
CAN	+	0101	CAN utils
USB	+	0100	usbutils
I2C	+	0100	i2c-tools
GUI	+	0101	Qt 4.8 on request
CSI			on request

Key: + tested \| - untested \| ? open

BSP Overview