This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. <alert type="warning" dismiss="false" icon="fa fa-warning">Work in Progress.</alert> ===== Boot Device Selection (S1, S2) ===== To select the desired boot medium set the DIP switches S1 and S2 accordingly. \\ The following boot modes of the AM57XX can be selected by the DIP switches S1 and S2 on the MBa57xx. ---- <grid> <col sm="4"> <panel type="primary" title="SD-Card"> <grid> <col sm="6"> <WRAP centeralign> [size=150%]**S1**[/size] {{ :en:dip_8_10000001.png?nolink&150 |}} </WRAP> </col> <col sm="6"> <WRAP centeralign> [size=150%]**S2**[/size] {{ :en:dip_8_00110000.png?nolink&150 |}} </WRAP> </col> </grid> </panel> </col> <col sm="4"> <panel type="primary" title="eMMC"> <grid> <col sm="6"> <WRAP centeralign> [size=150%]**S1**[/size] {{ :en:dip_8_10000001.png?nolink&150 |}} </WRAP> </col> <col sm="6"> <WRAP centeralign> [size=150%]**S2**[/size] {{ :en:dip_8_00100000.png?nolink&150 |}} </WRAP> </col> </grid> </panel> </col> <col sm="4"> <panel type="primary" title="QSPI NOR"> <grid> <col sm="6"> <WRAP centeralign> [size=150%]**S1**[/size] {{ :en:dip_8_10000001.png?nolink&150 |}} </WRAP> </col> <col sm="6"> <WRAP centeralign> [size=150%]**S2**[/size] {{ :en:dip_8_00110110.png?nolink&150 |}} </WRAP> </col> </grid> </panel> </col> </grid> ===== Functional DIP Switches ===== DIP-Switch settings for interfaces like JTAG, RS485 and CAN. ---- <grid> <col sm="6"> <panel type="primary" title="CAN1 (X5)"> DIP switch S3 is used to configure the CAN interface CAN1. \\ Both switches must be set to **ON** or **OFF** otherwise the CAN Bus has an improper termination. ^ DIP ^ S3-1 & S3-2 | ^ ON | CAN Bus not terminated | ^ OFF (default) | CAN Bus terminated (120Ω) | </panel> </col> <col sm="6"> <panel type="primary" title="CAN2 (X6)"> DIP switch S7 is used to configure the CAN interface CAN2. \\ Both switches must be set to **ON** or **OFF** otherwise the CAN Bus has an improper termination. ^ DIP ^ S7-1 & S7-2 | ^ ON | CAN Bus not terminated | ^ OFF (default) | CAN Bus terminated (120Ω) | </panel> </col> </grid> <grid> <col sm="6"> <panel type="primary" title="RS485 configuration (S5)"> DIP switch S5 is used to configure the RS485 interface. \\ ^ DIP ^ S5-1 ^ S5-2 | ^ ON | RS485 TxD terminated (120Ω) | RS485 RxD terminated (120Ω) | ^ OFF (default) | RS485 TxD not terminated | RS485 RxD not terminated | </panel> </col> <col sm="6"> <panel type="primary" title="JTAG configuration (S13)"> DIP switch S13 is used to configure the JTAG interface. \\ ^ DIP ^ S13 | ^ ON | JTAG via connector X11 | ^ OFF | JTAG via Micro-USB (x10) | </panel> </col> </grid> Last modified: 2022/08/04 15:02