STKa67xx Boot Device Selection (S4, S5, S6, S7)
The following boot modes can be configured by setting the DIP switches S4, S5, S6, S7 on the MBa67xx.
SD-Card
S1
S2
S3
S4
eMMC
S1
S2
S3
S4
QSPI-NOR
S1
S2
S3
S4
STKa67xx Functional DIP Switches
CAN0 configuration (S6)
DIP switch S6 is used to configure the CAN interfaces CAN0.
| Funktion | S6-1 | S6-2 |
|---|---|---|
| CAN-Bus not terminated | OFF | OFF |
| not defined (illegal state) | OFF | ON |
| not defined (illegal state) | ON | OFF |
| CAN-Bus terminated with 120 Ohm | ON | ON |
CAN1 configuration (S7)
DIP switch S7 is used to configure the CAN interfaces CAN1.
| Funktion | S7-1 | S7-2 |
|---|---|---|
| CAN-Bus not terminated | OFF | OFF |
| not defined (illegal state) | OFF | ON |
| not defined (illegal state) | ON | OFF |
| CAN-Bus terminated with 120 Ohm | ON | ON |