MBa8x DIP switch settings
Boot Device Selection (S1)
To select the desired boot medium set the DIP switches S1 accordingly.
The following boot modes of the TQMa8x can be selected by the DIP switches S1 on the MBa8x.
SD-Card
S1
eMMC
S1
SPI Nor 3Byte Read
S1
SPI NOR 4Byte Read
S1
Hyperflash 1.8V
S1
Serial Downloader
S1
Boot from Fuses
S1
Functional DIP Switches
DIP-Switch settings for CAN interface.
CAN-Bus 0 (SW10)
Feature | SW10-1 | SW10-2 |
---|---|---|
CAN-Bus not terminated | OFF | OFF |
CAN-Bus terminated with 120 Ohm | ON | ON |
not defined (illegal state) | OFF | ON |
not defined (illegal state) | ON | OFF |
CAN-Bus 1 (SW11)
Feature | SW11-1 | SW11-2 |
---|---|---|
CAN-Bus not terminated | OFF | OFF |
CAN-Bus terminated with 120 Ohm | ON | ON |
not defined (illegal state) | OFF | ON |
not defined (illegal state) | ON | OFF |