MBa8Xx DIP switch settings
Boot Modes
The following boot modes of the i.MX8X can be selected by the DIP switch S1 on the MBa8Xx.
SD-Card
S1
eMMC
S1
QSPI NOR
S1
Serial Downloader
S1
Boot from Fuses
S1
Functional DIP Switches
DIP-Switch settings for DP-Bridge and CAN.
DSI-to-DP-Bridge (S9)
Only available on MBa8Xx Rev.01xx
| DIP | S9 |
|---|---|
| ON | enable DSI-to-DP-Bridge |
| OFF | use LVDS interface |
CAN configuration (S7)
DIP switch S7 is used to configure the CAN interfaces CAN1 and CAN2.
| DIP | OFF (default) | ON |
|---|---|---|
| S7-1 | CAN0 not terminated | CAN0 interface terminated (120Ω) |
| S7-2 | CAN1 not terminated | CAN1 interface terminated (120Ω) |