This is an old revision of the document!
WORK IN PROGRESS
MBa8Xx DIP switch settings
Boot Modes
The following boot modes of the i.MX8X can be selected by the DIP switches S1 MBa8Xx.
SD Card
S1 | |||||
---|---|---|---|---|---|
DIP | 1 | 2 | 3 | 4 | |
ON | • | • | |||
OFF | • | • |
eMMC
S1 | |||||
---|---|---|---|---|---|
DIP | 1 | 2 | 3 | 4 | |
ON | • | ||||
OFF | • | • | • |
SPI NOR
S1 | |||||
---|---|---|---|---|---|
DIP | 1 | 2 | 3 | 4 | |
ON | • | • | |||
OFF | • | • |
DSI-to-DP Bridge
CAN configuration (S)
DIP switch S is used to configure the CAN interfaces CAN1 and CAN2.
<WRAP half column>
Termination
DIP | OFF (default) | ON |
---|---|---|
S13-1 | CAN0 not terminated | CAN0 interface terminated (120Ω) |
S13-2 | CAN1 not terminated | CAN1 interface terminated (120Ω) |