This is an old revision of the document!
The following boot modes of the i.MX8X can be selected by the DIP switches S1 MBa8Xx.
| | S1 |
| |
DIP | 1 | 2 | 3 | 4 |
ON | | | • | • |
OFF | • | • | | |
| | S1 |
| |
DIP | 1 | 2 | 3 | 4 |
ON | | | • | |
OFF | • | • | | • |
| | S1 |
| |
DIP | 1 | 2 | 3 | 4 |
ON | | • | • | |
OFF | • | | | • |
| | S1 |
| |
DIP | 1 | 2 | 3 | 4 |
ON | | | | • |
OFF | • | • | • | |
| | S1 |
| |
DIP | 1 | 2 | 3 | 4 |
ON | | | | |
OFF | • | • | • | • |
DIP | OFF (default) | ON |
S9 | use LVDS interface | enable DSI-to-DP-Bridge |
DIP switch S7 is used to configure the CAN interfaces CAN1 and CAN2.
DIP | OFF (default) | ON |
S7-1 | CAN0 not terminated | CAN0 interface terminated (120Ω) |
S7-2 | CAN1 not terminated | CAN1 interface terminated (120Ω) |