This is an old revision of the document!
WORK IN PROGRESS
MBa8Xx DIP switch settings
Boot Modes
The following boot modes of the i.MX8X can be selected by the DIP switches S1 MBa8Xx.
SD-Card
S1
1 | 2 | 3 | 4 | |
---|---|---|---|---|
ON | • | • | ||
OFF | • | • |
eMMC
S1
1 | 2 | 3 | 4 | |
---|---|---|---|---|
ON | • | |||
OFF | • | • | • |
QSPI NOR
S1
1 | 2 | 3 | 4 | |
---|---|---|---|---|
ON | • | • | ||
OFF | • | • |
Serial Downloader
S1
1 | 2 | 3 | 4 | |
---|---|---|---|---|
ON | • | |||
OFF | • | • | • |
</grid>
Boot from Fuses
S1
1 | 2 | 3 | 4 | |
---|---|---|---|---|
ON | ||||
OFF | • | • | • | • |
DSI-to-DP-Bridge (S9)
Only available on MBa8Xx Rev.01xx
DIP | OFF (default) | ON |
---|---|---|
S9 | use LVDS interface | enable DSI-to-DP-Bridge |
CAN configuration (S7)
DIP switch S7 is used to configure the CAN interfaces CAN1 and CAN2.
Termination
DIP | OFF (default) | ON |
---|---|---|
S7-1 | CAN0 not terminated | CAN0 interface terminated (120Ω) |
S7-2 | CAN1 not terminated | CAN1 interface terminated (120Ω) |