This is an old revision of the document!
MBa8Xx DIP switch settings
Boot Modes
The following boot modes of the i.MX8X can be selected by the DIP switch S1 on the MBa8Xx.
SD-Card
S1
eMMC
S1
QSPI NOR
S1
Serial Downloader
S1
Boot from Fuses
S1
Functional DIP Switches
DIP-Switch settings for DP-Bridge and CAN.
DSI-to-DP-Bridge (S9)
Only available on MBa8Xx Rev.01xx
| DIP | S9 |
|---|---|
| ON | enable DSI-to-DP-Bridge |
| OFF | use LVDS interface |
CAN configuration (S7)
DIP switch S7 is used to configure the CAN interfaces CAN1 and CAN2.
| DIP | OFF (default) | ON |
|---|---|---|
| S7-1 | CAN0 not terminated | CAN0 interface terminated (120Ω) |
| S7-2 | CAN1 not terminated | CAN1 interface terminated (120Ω) |