MBa95xxCA DIP switch settings
Boot Devices
The following boot modes of the i.MX95 can be selected by the DIP switch S1 on the MBa95xxCA Board.
SD-Card
S1
eMMC
S1
Flex SPI
S1
Serial Downloader
S1
Note: (REV.010x) This setting is mandatory for recovery. When no valid bootimage is present on the selected boot device, automatic fallback of the ROM loader to serial downloader is restricted by the MBa95xxCA boot logic.
Boot from Fuses
S1
Note: preferred mode for production hardware.