Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
en:general_information:tutorial:spi [2015/09/15 17:13] – added /usr/bin liedmannen:general_information:tutorial:spi [2022/08/04 15:02] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +~~NOCACHE~~
 +~~NOTOC~~
 ===== SPI ===== ===== SPI =====
 \\ \\
Line 9: Line 11:
 ==== Testing spidev 0.1 ==== ==== Testing spidev 0.1 ====
  
-<wrap Round info 65%>spidev_test is a loopback test to use it on the starterkit please put a bridge between **X27_43 (SPI1.MOSI)** and **X27_44 (SPI1.MISO)**.</wrap>+<wrap Round info 65%>spidev_test is a loopback test, to use it on the Starterkit put a bridge between the pins **X27_43 (SPI1.MOSI)** and **X27_44 (SPI1.MISO)**.</wrap>
  
 To run spidev with /dev/spi0.1 you need to specify the device with -D parameter To run spidev with /dev/spi0.1 you need to specify the device with -D parameter
Line 52: Line 54:
 ==== Testing spidev 4.0 ==== ==== Testing spidev 4.0 ====
  
-<wrap Round info 65%>spidev_test is a loopback test to use it on the starterkit please put a bridge between **X28_51 (ECSPI5.MIS0)** and **X28_53 (ECSPI5.MOSI)**.</wrap>+<wrap Round info 65%>spidev_test is a loopback test, to use it on the starterkit put a bridge between the pins **X28_51 (ECSPI5.MIS0)** and **X28_53 (ECSPI5.MOSI)**.</wrap>
  
 To run spidev with /dev/spi4.0 you need to specify the device with -D parameter  To run spidev with /dev/spi4.0 you need to specify the device with -D parameter 
  • Last modified: 2022/08/04 15:04