Install Windows 10 IoT Enterprise
This guide provides step-by-step instructions on how to install Windows 10 IoT Enterprise on the TQMx86 Embedded Module, which is based on an Intel x86 CPU.
Prerequisites
- TQMx86 Embedded Module
- Internet connection
- An SD card or USB stick (USB stick recommended)
- A computer to prepare the boot medium
Step 1: Download Windows 10 IoT Enterprise
Download the latest version of Windows 10 IoT Enterprise for x86 systems:
Information about the latest Windows 10 IoT Enterprise
Step 2: Prepare the Boot Medium
Write the downloaded Windows 10 IoT Enterprise image to an SD card or USB stick using a tool like Rufus:
Step 3: Boot from the Prepared Medium
- Insert the prepared SD card or USB stick into the TQMx86 module.
- Boot into the UEFI of the TQMx86 module.
- Navigate to the Boot Manager in the UEFI.
- Select the USB stick or SD card to boot from. The system will proceed without any further input.
Step 4: Install Windows 10 IoT Enterprise
- Once you're in the Windows 10 IoT Enterprise setup environment, follow the on-screen instructions to complete the installation.
- This includes selecting the hard drive, language, region, and other preferences.
Step 5: Update and Configure (Optional but Recommended)
After the installation is complete and you've booted into Windows 10 IoT Enterprise:
- Connect to the internet and check for system updates.
- Configure device settings, security policies, and any other necessary configurations specific to your application.
Conclusion
Windows 10 IoT Enterprise should now be successfully installed on your TQMx86 Embedded Module.