| Subject | Description | Status | Remark |
| Rescue Mode | Rescue Mode Installation sporadically hangs | | |
| Sound | SGTL5000 at I2C Bus sporadically hangs | | |
| MDIO Timeout | Re-initialization the FEC interface results in MDIO Timeout, interface permanently down afterwards | Workaround | |
| DDR eMMC | doesn't work | Workaround | DDR disabled |
| Crash I2C | sporadic crashes during kernel boot and I2C initialization | OKAY | currently not occuring any more |
| Kernel Oops | at reboot and halt | OKAY | currently not occuring any more |
| USB | upper USB-Port does not get power | OKAY | |
| Ethernet | ethernet hangs to often after re-initialization | OKAY | workaround “Reset PHY” seems to work (SVN r50) |
| MMC Card Insertion | Detection should be configurable seperately for each interfacce (eMMC vs. ext. SD) | OKAY | |
| Link status | the link status of the PHYs is not recognized correctly (U-Boot + Kernel) | OKAY | hardware has been modified (Phy Addr 0 was connected to FEC1 and Phy Addr 1 to FEC0) |
| Boot eMMC | does not work, ROM Booter not accessing the eMMC | OKAY | HW problem, pull-ups required at LCD_D00+03 |
| OTP fuses | OTP fuses cannot be blown, no tool available | OKAY | tool not necessarily required. Programm only available from Freescale under NDA, kernel provides OTP Treiber, may be worth trying |