en:layerscape:tqmls102xa:linux:ptxdist

— Template tabs_new not found.

Important Notes

CVE-2015-7547 --- glibc getaddrinfo() stack-based buffer overflow

Pengutronix has released new versions of their OSELAS Toolchains, which fix the CVE-2015-7547 --- glibc getaddrinfo() stack-based buffer overflow issue:

OSELAS version	glibc version
2014.12.2	2.20
2013.12.3	2.18
2012.12.2	2.16.0
2011.11.4	2.14.1
2011.03.2	2.13

TQ strongly recommends to switch your PTXdist based BSP(s) to one of the above mentioned (or later) OSELAS toolchains.

For deployed systems with network connectivity, an update should be taken into consideration!

Step-by-step instructions to switch your BSP to a new toolchain

1. Build the new OSELAS toolchain

Choose the new toolchain version, which fits best and build it according to the Application Note: Building OSELAS.Toolchains().

2. Reconfigure your BSP / platform

Move to your BSP root folder and execute
```
ptxdist platformconfig
```

Navigate to

architecture -->  toolchain -->

and modify the following options

(OSELAS.Toolchain-YYYY.MM.P) check for specific toolchain vendor
(MAJOR.MINOR[.PATCH]) check for specific glibc version

to match the version information for the toochain you built in the first step.

Exit PTXdist and make sure your changes are saved.
To make PTXdist use the new toolchain for your BSP / platform execute
```
ptxdist toolchain <path to the new toolchain>
```

3. Rebuild your BSP

For a clean rebuild execute
```
ptxdist clean
ptxdist go --git
```

BSP revision	Prerelease 7a3ec3d	0004	0005	0100	0102	0109	0110	0111
PTXdist version required by BSP	2015.02	2015.05	2015.05	2015.05	2016.04	2016.04	2018.09	2018.09
OSELAS Toolchain cf. Building OSELAS.Toolchains()	2013.12.2	2013.12.2	2013.12.2	2013.12.2	2013.12.2	2013.12.2	2018.02	2018.02
Platform	MBLS102xA	MBLS102xA	MBLS102xA	MBLS102xA	MBLS102xA	MBLS102xA	MBLS102xA	MBLS102xA
U-boot	2015.04	2015.04	2015.04	2016.05	2016.05	2017.07	2017.11	2017.11
Linux Kernel	3.12	3.12	4.4	4.4	4.4	4.4	4.14	4.14

Feature				BSP Revision		Remarks
TQ Product	Chip	Interface	Function	0102	0109	Remarks
TQMLS102xA	LS102xA	eSDHC	eMMC / SD-Card	•	•	mutually exclusive (cf user's manual)
TQMLS102xA	LS102xA	ETSEC	RGMII / SGMII	•	•	For SGMII MBLS102xA Rev. ≥ 0200 required
TQMLS102xA	LS102xA	I2C1	EEPROM / PMC (System Reset Request)	•	•
TQMLS102xA	LS102xA	QSPI	QSPI NOR Flash	•	•	up to 2 Devices
TQMLS102xA	LS102xA	SATA		•	•	SSD/HDD
TQMLS102xA	LS102xA	UART1	RS232	•	•	default console
TQMLS102xA	LS102xA	USB XHCI	USB 3.0/2.0	•	•	USB Storage Device

Boot device	BSP Revision		Remarks
Boot device	0102	0109	Remarks
eMMC / SD	•	•	mutually exclusive
QSPI NOR-Flash		•

Please note that BSP Rev. 0100 is intended to be used on a MBLS102xA Rev. 02xx and higher.

When using BSP Rev. 0100 on a MBLS102xA Rev.01xx, please see How to Use BSP Rev.0100 on MBLS102xA Rev.01xx.

Feature				BSP Revision						Remarks
TQ Product	Chip	Interface	Function(s)	Prerelease 7a3ec3d	0004	0005	0100	0102	109	Remarks
TQMLS102xA	LS102x	2D-ACE	24 Bit RGB			•	•	•	•	Pin header X17 on MBLS102xA
	LS102x	2D-ACE	SiI9022A			•	•	•	•	HDMI
	LS102x	2D-ACE	SN75LVDS83B			•	•	•	•	LVDS
	LS102x	CAN1	CAN 2.0 B				•	•	•
	LS102x	CAN2	CAN 2.0 B				•	•	•
	LS102x	eSDHC	eMMC	•	•	•	•	•	•	mutually exclusive (cf user's manual)
	LS102x	eSDHC	SD card	•	•	•	•	•	•	mutually exclusive (cf user's manual)
	LS102x	eTSEC0	RGMII (10/100/1000 Mbit/s)	•	•	•	•	•	•
	LS102x	eTSEC1	SGMII (10/100/1000 Mbit/s)				•	•	•	MBLS102xA Rev. ≥ 0200 required
	LS102x	eTSEC2	RGMII (10/100/1000 Mbit/s)	•	•	•	•	•	•
	LS102x	GPIO	Digital I/O	•	•	•	•	•	•
	LS102x	I2C1	Bus access			•	•	•	•
	LS102x	I2C1	EEPROM (M24C64)			•	•	•	•	EEPROM
	LS102x	I2C1	RTC (PCF85063)			•	•	•	•	RTC
	LS102x	I2C1	TEMP-Sensor (SA56004X)			•	•	•	•	TEMP-Sensor
	LS102x	LPUART1	TTL
	LS102x	PCIe	PCI Express™ Base Specification, Revision 3.0				•	•	•	PCIe slot (X35) on MBLS102xA Mini-PCIe slot (X24) on MBLS102xA
	LS102x	QSPI	QSPI NOR Flash			•	•	•	•
	LS102x	SATA	Serial ATA Revision 3.0				•	•	•
	LS102x	UART1	TTL	•	•	•	•	•	•
	LS102x	USB1	USB 3.0 OTG	•	•	•	•	•	•
	LS102x	USB2	USB2517 on MBLS102xA	•		•	•	•	•
MBLS102xA	MBED/OpenSDA	miniUSB	Console	•	•	•	•	•	•	Console available on X43 xor X5 (LPUART)
	SAI1	TLV320AIC3204	Audio Codec
	SiI9022A	HDMI	Ext. Monitor					•	•	MBLS102xA REV.0202 and TQMLS102xA ≥ REV.0203 required
	SN75LVDS83B	LVDS	Ext. Display			•	•	•	•	X10 / X32
	SP3222E	UART1	RS232	•	•	•	•	•	•
	SP491E	LPUART1	RS485				•	•	•
	STMPE811	I2C	Touch							planned for future revision
	USB2517	USB2_H4	Host			•	•	•	•
	USB2517	USB2_H5	Host			•	•	•	•
	USB2517	USB2_H6	Host			•	•	•	•	assembly option: Safenet HL Chip Sentinel

2018/06/14 - REV.0109

2016/11/23 - REV.0102

2016/05/19 - REV.0100

2016/03/23 - REV.0005

BSP Overview

BSP Version Matrix

Bootloader

Supported features

Supported boot devices

Operating System

Changelog