Supported Features

Please note that BSP Rev. 0100 is intended to be used on a MBLS102xA Rev. 02xx and higher.

When using BSP Rev. 0100 on a MBLS102xA Rev.01xx, please see How to Use BSP Rev.0100 on MBLS102xA Rev.01xx.

Feature BSP Revision Remarks
TQ Product Chip Interface Function(s) Prerelease
7a3ec3d 		0004 0005 0100 0102 109
TQMLS102xA LS102x 2D-ACE 24 Bit RGB • • • • Pin header X17 on MBLS102xA
LS102x 2D-ACE SiI9022A • • • • HDMI
LS102x 2D-ACE SN75LVDS83B • • • • LVDS
LS102x CAN1 CAN 2.0 B • • •
LS102x CAN2 CAN 2.0 B • • •
LS102x eSDHC eMMC • • • • • • mutually exclusive (cf user's manual)
LS102x eSDHC SD card • • • • • •
LS102x eTSEC0 RGMII (10/100/1000 Mbit/s) • • • • • •
LS102x eTSEC1 SGMII (10/100/1000 Mbit/s) • • • MBLS102xA Rev. ≥ 0200 required
LS102x eTSEC2 RGMII (10/100/1000 Mbit/s) • • • • • •
LS102x GPIO Digital I/O • • • • • •
LS102x I2C1 Bus access • • • •
LS102x I2C1 EEPROM (M24C64) • • • • EEPROM
LS102x I2C1 RTC (PCF85063) • • • • RTC
LS102x I2C1 TEMP-Sensor (SA56004X) • • • • TEMP-Sensor
LS102x LPUART1 TTL
LS102x PCIe PCI Express™ Base Specification, Revision 3.0 • • • PCIe slot (X35) on MBLS102xA
Mini-PCIe slot (X24) on MBLS102xA
LS102x QSPI QSPI NOR Flash • • • •
LS102x SATA Serial ATA Revision 3.0 • • •
LS102x UART1 TTL • • • • • •
LS102x USB1 USB 3.0 OTG • • • • • •
LS102x USB2 USB2517 on MBLS102xA • • • • •
MBLS102xA MBED/OpenSDA miniUSB Console • • • • • • Console available on X43 xor X5 (LPUART)
SAI1 TLV320AIC3204 Audio Codec
SiI9022A HDMI Ext. Monitor • • MBLS102xA REV.0202
and
TQMLS102xA ≥ REV.0203 required
SN75LVDS83B LVDS Ext. Display • • • • X10 / X32
SP3222E UART1 RS232 • • • • • •
SP491E LPUART1 RS485 • • •
STMPE811 I2C Touch planned for future revision
USB2517 USB2_H4 Host • • • •
USB2517 USB2_H5 Host • • • •
USB2517 USB2_H6 Host • • • • assembly option:
Safenet HL Chip Sentinel
  • Last modified: 2022/08/04 15:02