MBLS102xA DIP switch settings

To select the desired boot medium set the DIP switches S3, S9 accordingly

SD-Card

S3

only for TQMLS102xA without eMMC

eMMC

S3

eMMC is a placement option on TQMLS102xA

QSPI NOR

S3
S3-2 ON: TQMLS102xA without eMMC
S3-2 OFF: TQMLS102xA with eMMC

S9 DIP switch 1 + 2

S9	DIP 1	DIP 2
HDMI	ON	ON
LVDS	OFF	ON
UCC	ON	OFF
LVDS_RGBINV	OFF	OFF

S9 DIP switch 3 + 4

S9	DIP 3	DIP 4
EC1	ON	ON
CAN1 / CAN2	OFF	ON
SAI1 / SAI2	ON	OFF
Reserved	OFF	OFF

The settings of DIP S9 has to match the TQMLS102xA BSP RCW configuration.

CPLD mux mode #1 EC1_HDMI matches the default RCW configuration of the TQMLS102xA BSP.
If DIP S9 is not set to one of the CPLD mux modes #1 - #12, the CPLD firmware selects mux mode #1.

Function	S9-1	S9-2	S9-3	S9-4
#1 EC1 + HDMI	ON	ON	ON	ON
#2 EC1 + LVDS	OFF	ON	ON	ON
#3 EC1 + UCC	ON	OFF	ON	ON
#4 EC1 + LVDS_RGBINV	OFF	OFF	ON	ON
#5 CAN + HDMI	ON	ON	OFF	ON
#6 CAN + LVDS	OFF	ON	OFF	ON
#7 CAN + UCC	ON	OFF	OFF	ON
#8 CAN + LVDS_RGBINV	OFF	OFF	OFF	ON
#9 SAI + HDMI	ON	ON	ON	OFF
#10 SAI + LVDS	OFF	ON	ON	OFF
#11 SAI + UCC	ON	OFF	ON	OFF
#12 SAI + LVDS_RGBINV	OFF	OFF	ON	OFF
#13 - #16 reserved	/	/	OFF	OFF

DIP-Switch settings for CAN and RS485.

CAN configuration (S2)

DIP switch S2 is used to configure the CAN interfaces CAN1 and CAN2.

DIP	OFF (default)	ON
S2-1	CAN0 not terminated	CAN0 interface terminated (120Ω)
S2-2	CAN1 not terminated	CAN1 interface terminated (120Ω)

RS485 configuration (S1)

DIP switch S1 is used to configure the RS485 interface.

DIP	OFF (default)	ON
S1-1	RS485 RxD not terminated	RS485 RxD terminated (120Ω)
S1-2	RS485 TxD not terminated	RS485 TxD terminated (120Ω)