Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:arm:tqmls102xa:mbls102xa:dip_switches [2015/07/19 11:08] liedmannen:layerscape:tqmls102xa:mbls102xa:dip_switches [2022/10/12 12:53] (current) liedmann
Line 1: Line 1:
- ====== MBLS102xA DIP switch settings ======+====== MBLS102xA DIP switch settings ======
  
-<WRAP round important>WORK IN PROGRESS</WRAP>+ 
 +===== Boot Device Selection (S3) ===== 
 +To select the desired boot medium set the DIP switches S3, S9 accordingly 
 + 
 +<grid> 
 +<col sm="4"> 
 + 
 +<panel type="primary" title="SD-Card"> 
 +<WRAP centeralign> 
 +[size=150%]**S3**[/size] 
 +{{ :en:dip_4_11xx.png?nolink&150 |}} 
 +<alert type="warning">only for TQMLS102xA <wrap em>without eMMC</wrap></alert> 
 +</WRAP> 
 +</panel> 
 + 
 +</col> 
 + 
 +<col sm="4"> 
 + 
 +<panel type="primary" title="eMMC"> 
 +<WRAP centeralign> 
 +[size=150%]**S3**[/size] 
 +{{ :en:dip_4_10xx.png?nolink&150 |}} 
 +<alert type="info">eMMC is a placement option on TQMLS102xA</alert> 
 +</WRAP> 
 +</panel> 
 + 
 +</col> 
 +<col sm="4"> 
 + 
 +<panel type="primary" title="QSPI NOR"> 
 +<WRAP centeralign> 
 +[size=150%]**S3**[/size] 
 +{{ :en:dip_4_0xxx.png?nolink&150 |}}\\ 
 +S3-2 ON: TQMLS102xA without eMMC \\ 
 +S3-2 OFF: TQMLS102xA with eMMC 
 +</WRAP> 
 +</panel> 
 +</col> 
 +</grid> 
 + 
 + 
 + 
 + 
 +===== CPLD Function Selection (S9) ===== 
 +\\ 
 + 
 +<grid> 
 +<col sm="6"> 
 +<panel type="primary" title="S9 DIP switch 1 + 2"> 
 +^  S9  ^  DIP 1  ^  DIP 2  ^  
 +^  HDMI  |  ON  |  ON  | 
 +^  LVDS  |  OFF  |  ON  | 
 +^  UCC  |  ON  |  OFF  |  
 +^  LVDS_RGBINV  |  OFF  |  OFF  | 
 +</panel> 
 +</col> 
 + 
 +<col sm="6"> 
 +<panel type="primary" title="S9 DIP switch 3 + 4"> 
 +^  S9  ^  DIP 3  ^  DIP 4  ^   
 +^  EC1  |  ON  |  ON  | 
 +^  CAN1 / CAN2  |  OFF  |  ON  | 
 +^  SAI1 / SAI2  |  ON  |  OFF  | 
 +^  Reserved  |  OFF  |  OFF  | 
 +</panel> 
 +</col> 
 +</grid> 
 + 
 +<alert type="warning">The settings of DIP S9 has to match the TQMLS102xA BSP RCW configuration.</alert> 
 +<callout type="info" icon="true"> 
 +CPLD mux mode #1 EC1_HDMI matches the default RCW configuration of the TQMLS102xA BSP.\\ 
 +If DIP S9 is not set to one of the CPLD mux modes #1 - #12, the CPLD firmware selects mux mode #1. </callout> 
 + 
 +<panel> 
 +^  Function  ^  S9-1  ^  S9-2  ^  S9-3  ^  S9-4  ^  
 +^ #1  EC1 + HDMI  |  ON  |  ON  |  ON  |  ON  |   
 +^ #2  EC1 + LVDS  |  OFF  |  ON  |  ON  |  ON  | 
 +^ #3  EC1 + UCC  |  ON  |  OFF  |  ON  |  ON  | 
 +^ #4  EC1 + LVDS_RGBINV  |  OFF  |  OFF  |  ON  |  ON  | 
 +^ #5  CAN + HDMI  |  ON  |  ON  |  OFF  |  ON  | 
 +^ #6  CAN + LVDS  |  OFF  |  ON  |  OFF  |  ON  | 
 +^ #7  CAN + UCC  |  ON  |  OFF  |  OFF  |  ON  | 
 +^ #8  CAN + LVDS_RGBINV  |  OFF  |  OFF  |  OFF  |  ON  |  
 +^ #9  SAI + HDMI  |  ON  |  ON  |  ON  |  OFF  | 
 +^ #10 SAI + LVDS  |  OFF  |  ON  |  ON  |  OFF  | 
 +^ #11 SAI + UCC  |  ON  |  OFF  |  ON  |  OFF  | 
 +^ #12 SAI + LVDS_RGBINV  |  OFF  |  OFF  |  ON  |  OFF  | 
 +^ #13 - #16 reserved  |  /  |  /  |  OFF  |  OFF  | 
 +</panel> 
 + 
 + 
 + 
 + 
 +===== Functional DIP Switches ===== 
 +DIP-Switch settings for CAN and RS485. 
 + 
 +<grid> 
 +<col sm="6"> 
 +<panel type="primary" title="CAN configuration (S2)"> 
 +DIP switch S2 is used to configure the CAN interfaces CAN1 and CAN2. 
 +^  DIP  ^  OFF (default)  ^  ON  ^ 
 +|  S2-1  |  CAN0 not terminated  |  CAN0 interface terminated (120Ω) 
 +|  S2-2  |  CAN1 not terminated  |  CAN1 interface terminated (120Ω) 
 +</panel> 
 +</col> 
 + 
 +<col sm="6"> 
 +<panel type="primary" title="RS485 configuration (S1)"> 
 +DIP switch S1 is used to configure the RS485 interface. 
 +^  DIP  ^  OFF (default)  ^  ON  ^ 
 +|  S1-1  |  RS485 RxD not terminated  |  RS485 RxD terminated (120Ω) 
 +|  S1-2  |  RS485 TxD not terminated  |  RS485 TxD terminated (120Ω) 
 +</panel> 
 +</col> 
 + 
 +</grid> 
 + 
 +----
  • Last modified: 2022/08/04 15:04