This is an old revision of the document!
MBLS102xA DIP switch settings
WORK IN PROGRESS
Boot Device Selection (S3, S9)
To select the desired boot medium set the DIP switches S3, S9 accordingly
SD card
| S3 | S9 | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| DIP | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 | ||
| ON | • | • | • | • | • | • | • | |||
| OFF | • | |||||||||
CAN configuration (S2)
DIP switch S2 is used to configure the CAN interfaces CAN0 and CAN1.
Termination
| DIP | OFF (default) | ON |
|---|---|---|
| S2-1 | CAN0 not terminated | CAN0 terminated (120Ω) |
| S2-2 | CAN1 not terminated | CAN1 terminated (120Ω) |
RS485 configuration (S1)
DIP switch S1 is used to configure the RS485 interface.
Termination
| DIP | OFF (default) | ON |
|---|---|---|
| S1-1 | RS485 RxD not terminated | RS485 RxD terminated (120Ω) |
| S1-2 | RS485 TxD not terminated | RS485 TxD terminated (120Ω) |