Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:arm:tqmls102xa:mbls102xa:dip_switches [2017/08/25 10:39] – Pictures Boot Device Selection schmiden:layerscape:tqmls102xa:mbls102xa:dip_switches [2022/10/12 12:53] (current) liedmann
Line 1: Line 1:
 ====== MBLS102xA DIP switch settings ====== ====== MBLS102xA DIP switch settings ======
  
-<WRAP round important>WORK IN PROGRESS</WRAP> 
  
 ===== Boot Device Selection (S3) ===== ===== Boot Device Selection (S3) =====
 To select the desired boot medium set the DIP switches S3, S9 accordingly To select the desired boot medium set the DIP switches S3, S9 accordingly
  
-==== SD card ==== +<grid> 
-<wrap round important 60%>only for TQMLS102xA <wrap em>without eMMC</wrap></wrap>+<col sm="4">
  
-^ |:::  ^  S3  |||| +<panel type="primary" title="SD-Card"> 
-^ |:::  ^  {{ :intern:arm:tqmls102xa:mbls102xa:dip_4_1100_2.png?nolink&60 |}}  ||||    +<WRAP centeralign> 
-^  DIP  |::: ^  1  ^  2  ^  3  ^  4  | +[size=150%]**S3**[/size] 
-^  ON  |:::|  •  |  •  ^  ^  ^        +{{ :en:dip_4_11xx.png?nolink&150 |}} 
-^  OFF  |:::|  |    ^ ^ ^     +<alert type="warning">only for TQMLS102xA <wrap em>without eMMC</wrap></alert> 
-\\+</WRAP> 
 +</panel>
  
 +</col>
 +
 +<col sm="4">
 +
 +<panel type="primary" title="eMMC">
 +<WRAP centeralign>
 +[size=150%]**S3**[/size]
 +{{ :en:dip_4_10xx.png?nolink&150 |}}
 +<alert type="info">eMMC is a placement option on TQMLS102xA</alert>
 +</WRAP>
 +</panel>
 +
 +</col>
 +<col sm="4">
 +
 +<panel type="primary" title="QSPI NOR">
 +<WRAP centeralign>
 +[size=150%]**S3**[/size]
 +{{ :en:dip_4_0xxx.png?nolink&150 |}}\\
 +S3-2 ON: TQMLS102xA without eMMC \\
 +S3-2 OFF: TQMLS102xA with eMMC
 +</WRAP>
 +</panel>
 +</col>
 +</grid>
  
  
-==== eMMC ==== 
-<wrap round info 40%> eMMC is a placement option on TQMLS102xA</wrap> 
  
-^ |:::  ^  S3  |||| 
-^ |:::  ^  {{ :intern:arm:tqmls102xa:mbls102xa:dip_4_1000_2.png?nolink&60 |}}  ||||    
-^  DIP  |::: ^  1  ^  2  ^  3  ^  4  | 
-^  ON  |:::|  •  |    ^  ^  ^ 
-^  OFF  |:::|  |  •  ^  ^  ^    
-\\ 
-==== QSPI ==== 
-^ |:::  ^  S3  |||| 
-^ |:::  ^  {{ :intern:arm:tqmls102xa:mbls102xa:dip_4_0x00_2.png?nolink&60 |}}  ||||    
-^  DIP  |::: ^  1  ^  2  ^  3  ^  4  | 
-^  ON  |:::|    |  °((TQMLS102xA without eMMC))  ^ ^ ^ 
-^  OFF  |:::|  •  |  °((TQMLS102xA with eMMC))  ^ ^ ^    
-\\ 
  
 ===== CPLD Function Selection (S9) ===== ===== CPLD Function Selection (S9) =====
 \\ \\
-==== S9 DIP switch 1 + 2 ==== 
- 
  
 +<grid>
 +<col sm="6">
 +<panel type="primary" title="S9 DIP switch 1 + 2">
 ^  S9  ^  DIP 1  ^  DIP 2  ^  ^  S9  ^  DIP 1  ^  DIP 2  ^ 
 ^  HDMI  |  ON  |  ON  | ^  HDMI  |  ON  |  ON  |
Line 45: Line 56:
 ^  UCC  |  ON  |  OFF  |  ^  UCC  |  ON  |  OFF  | 
 ^  LVDS_RGBINV  |  OFF  |  OFF  | ^  LVDS_RGBINV  |  OFF  |  OFF  |
-\\ +</panel> 
- +</col>
- +
- +
-==== S9 DIP switch 3 + 4 ==== +
  
-^  S9  ^  DIP 3 ^  DIP 4  ^  +<col sm="6"> 
 +<panel type="primary" title="S9 DIP switch 3 + 4"> 
 +^  S9  ^  DIP 3  ^  DIP 4  ^  
 ^  EC1  |  ON  |  ON  | ^  EC1  |  ON  |  ON  |
 ^  CAN1 / CAN2  |  OFF  |  ON  | ^  CAN1 / CAN2  |  OFF  |  ON  |
 ^  SAI1 / SAI2  |  ON  |  OFF  | ^  SAI1 / SAI2  |  ON  |  OFF  |
 ^  Reserved  |  OFF  |  OFF  | ^  Reserved  |  OFF  |  OFF  |
-\\ +</panel
- +</col
- +</grid>
-<WRAP round important> The settings of DIP S9 has to match the TQMLS102xA BSP RCW configuration.</WRAP  +
- +
-<WRAP round info>CPLD mux mode #1 EC1_HDMI matches the default RCW configuration of the TQMLS102xA BSP.\\ +
-If DIP S9 is not set to one of the CPLD mux modes #1 - #12, the CPLD firmware selects mux mode #1. </WRAP>+
  
 +<alert type="warning">The settings of DIP S9 has to match the TQMLS102xA BSP RCW configuration.</alert>
 +<callout type="info" icon="true">
 +CPLD mux mode #1 EC1_HDMI matches the default RCW configuration of the TQMLS102xA BSP.\\
 +If DIP S9 is not set to one of the CPLD mux modes #1 - #12, the CPLD firmware selects mux mode #1. </callout>
  
-^  Function  ^  S9-1  ^  S9-2  ^  S9-3  ^ S9-4  ^ +<panel> 
 +^  Function  ^  S9-1  ^  S9-2  ^  S9-3  ^  S9-4  ^ 
 ^ #1  EC1 + HDMI  |  ON  |  ON  |  ON  |  ON  |   ^ #1  EC1 + HDMI  |  ON  |  ON  |  ON  |  ON  |  
 ^ #2  EC1 + LVDS  |  OFF  |  ON  |  ON  |  ON  | ^ #2  EC1 + LVDS  |  OFF  |  ON  |  ON  |  ON  |
Line 77: Line 87:
 ^ #9  SAI + HDMI  |  ON  |  ON  |  ON  |  OFF  | ^ #9  SAI + HDMI  |  ON  |  ON  |  ON  |  OFF  |
 ^ #10 SAI + LVDS  |  OFF  |  ON  |  ON  |  OFF  | ^ #10 SAI + LVDS  |  OFF  |  ON  |  ON  |  OFF  |
-^ #11 SAI + LVDS   ON  |  OFF  |  ON  |  OFF  |+^ #11 SAI + UCC   ON  |  OFF  |  ON  |  OFF  |
 ^ #12 SAI + LVDS_RGBINV  |  OFF  |  OFF  |  ON  |  OFF  | ^ #12 SAI + LVDS_RGBINV  |  OFF  |  OFF  |  ON  |  OFF  |
-^ #13 - #16 reserved  ^ ^ |  OFF  |  OFF  |+^ #13 - #16 reserved  |  /  |  /  |  OFF  |  OFF  | 
 +</panel> 
  
-===== CAN configuration (S2) ===== 
-DIP switch S2 is used to configure the CAN interfaces CAN0 and CAN1. 
-<WRAP centeralign half column> 
-==== Termination ==== 
-^ DIP  ^ OFF (default)  ^  ON  ^ 
-| S2-1 |  CAN0 not terminated  | CAN0 terminated (120Ω) | 
-| S2-2 |  CAN1 not terminated  | CAN1 terminated (120Ω) | 
-</WRAP> 
-<WRAP clear></WRAP> 
  
-===== RS485 configuration (S1) =====+ 
 +===== Functional DIP Switches ===== 
 +DIP-Switch settings for CAN and RS485
 + 
 +<grid> 
 +<col sm="6"> 
 +<panel type="primary" title="CAN configuration (S2)"> 
 +DIP switch S2 is used to configure the CAN interfaces CAN1 and CAN2. 
 +^  DIP  ^  OFF (default)  ^  ON  ^ 
 +|  S2-1  |  CAN0 not terminated  |  CAN0 interface terminated (120Ω) 
 +|  S2-2  |  CAN1 not terminated  |  CAN1 interface terminated (120Ω) 
 +</panel> 
 +</col> 
 + 
 +<col sm="6"> 
 +<panel type="primary" title="RS485 configuration (S1)">
 DIP switch S1 is used to configure the RS485 interface. DIP switch S1 is used to configure the RS485 interface.
-<WRAP centeralign half column> + DIP  ^  OFF (default)  ^  ON  ^ 
-==== Termination ==== + S1-1  |  RS485 RxD not terminated  RS485 RxD terminated (120Ω)  
-^ DIP  ^ OFF (default)  ^  ON  ^ + S1-2  |  RS485 TxD not terminated  RS485 TxD terminated (120Ω)  
-| S1-1 |  RS485 RxD not terminated  | RS485 RxD terminated (120Ω) | +</panel> 
-| S1-2 |  RS485 TxD not terminated  | RS485 TxD terminated (120Ω) |  +</col> 
-</WRAP>+ 
 +</grid>
  
 +----
  • Last modified: 2022/08/04 15:04