Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revisionLast revisionBoth sides next revision | ||
en:layerscape:tqmls10xxa:linux:yocto:deployment_yocto [2021/11/03 13:31] – [Updating existing firmware over ethernet] schlueter | en:layerscape:tqmls10xxa:linux:yocto:deployment_yocto [2022/08/04 15:02] – external edit 127.0.0.1 | ||
---|---|---|---|
Line 40: | Line 40: | ||
A good approach to update the firmare components U-Boot, | A good approach to update the firmare components U-Boot, | ||
After setting up the TFTP server, the binaries that should be updated must be copied into the TFTP directory of your TFTP Server. | After setting up the TFTP server, the binaries that should be updated must be copied into the TFTP directory of your TFTP Server. | ||
+ | |||
==== Update Process ==== | ==== Update Process ==== | ||
- | 1. Setup the Starterkit to boot from SD/eMMC or QSPI, please see the [[ .: | + | 1. Setup the Starterkit to boot from SD/eMMC or QSPI, please see the [[ .: |
2. Connect the kit to the network with TFTP server supplying the binaries via ethernet on connector< | 2. Connect the kit to the network with TFTP server supplying the binaries via ethernet on connector< | ||
3. Power up the system and interrupt the boot process in U-Boot\\ | 3. Power up the system and interrupt the boot process in U-Boot\\ | ||
Line 88: | Line 89: | ||
__**Kernel**__ | __**Kernel**__ | ||
- | For Kernel update on eMMC/SD Card and QSPI NOR : | + | For Kernel update on eMMC/SD Card and QSPI NOR |
+ | |||
+ | : | ||
< | < | ||