Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
Last revisionBoth sides next revision
en:layerscape:tqmls10xxa:linux:yocto:deployment_yocto [2021/11/03 13:33] – [Update Process] schlueteren:layerscape:tqmls10xxa:linux:yocto:deployment_yocto [2022/08/04 15:02] – external edit 127.0.0.1
Line 39: Line 39:
 \\ \\
 A good approach to update the firmare components U-Boot,Linux kernel and devicetree in a running system is to load them from a TFTP server. Therefore a running TFTP server is required in your network environment, please see the[[en:general_information:tftp|how to setup TFTP Server]] page how to setup on your development host.   A good approach to update the firmare components U-Boot,Linux kernel and devicetree in a running system is to load them from a TFTP server. Therefore a running TFTP server is required in your network environment, please see the[[en:general_information:tftp|how to setup TFTP Server]] page how to setup on your development host.  
-After setting up the TFTP server, the binaries that should be updated must+After setting up the TFTP server, the binaries that should be updated must be copied into the TFTP directory of your TFTP Server.  
    
  
 ==== Update Process ====  ==== Update Process ==== 
  
-1. Setup the Starterkit to boot from SD/eMMC or QSPI, please see the [[ .:..:..:mbls10xxA:dip_switches|Starterkit dip switch page]] how to setup\\  +1. Setup the Starterkit to boot from SD/eMMC or QSPI,  please see the [[ .:..:..:mbls10xxA:dip_switches|Starterkit dip switch page]] how to setup\\  
 2. Connect the kit to the network with TFTP server supplying the binaries via ethernet on connector<label eth_prime>ETH_PRIME</label> \\ 2. Connect the kit to the network with TFTP server supplying the binaries via ethernet on connector<label eth_prime>ETH_PRIME</label> \\
 3. Power up the system and interrupt the boot process in U-Boot\\ 3. Power up the system and interrupt the boot process in U-Boot\\
  • Last modified: 2023/11/08 13:55