User Tools

Site Tools

vmware.png nfs.png tftp.png subversion.png eclipse.png logo.png tutorial.png

This is an old revision of the document!

Embedded module TQMT10xx - Linux BSP documentation


Partition scheme

Component mtd device Start address Content size Partition size
RCW mtd0 0xe8000000 0x0020000 0x50
Kernel mtd1 0xe8020000 0x54b000 0x0800000
Device Tree mtd2 0xe8820000 0x7800 0x0020000
RootFS mtd3 0xe8840000 0x1900000 0x4000000
Spare mtd4 0xec840000 0x3600000
FMAN mtd5 0xeff00000 0x7ea0 0x0020000
QE Microcode 0xeff10000 shared partition with FMAN firmware
U-Boot Env mtd6 0xeff20000 0x0020000
U-Boot mtd7 0xeff40000 0xc0000 0x00c0000

en/power/tqmt10xx/linux/yocto/adapt_bsp.1557759996.txt.gz · Last modified: 2019/05/13 17:06 by liedmann


TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
Recent changes RSS feed Valid XHTML 1.0 Valid CSS Driven by DokuWiki