Differences

This shows you the differences between two versions of the page.

--- en:x86:tqmx50uc:bios_overview [2018/09/14 09:52] – added Version .04 schmid
+++ en:x86:tqmx50uc:bios_overview [2019/05/29 16:48] – removed content and link to data page sections liedmann
@@ Line 1: / Line 1: @@
-^  BIOS Revision  ^  ME Firmware Version  ^  PCI Configurations  ^  BIOS Binary  ^
+===== BIOS Overview =====
-|  **5.5.01.0052.07**  |  10.0.36.1030  |  4x1 PCIe Lanes  | TQMx50UC_5.5.01.0052.07_X64.bin  |
+{{section>.:data#bios_overview&noheader}}
-|  :::  |  :::  |  1x4 PCIe Lanes  | TQMx50UC_5.5.01.0052.07_X64_pcie1x4.bin    |
-|  :::  |  :::  |  1x2 + 2x1 PCIe Lanes  | TQMx50UC_5.5.01.0052.07_X64_pcie1x2_2x1.bin  |
-^  ^^^^
-|  **5.5.01.0052.06**  |  10.0.36.1030  |  4x1 PCIe Lanes  | TQMx50UC_5.5.01.0052.06_X64.bin  |
-|  :::  |  :::  |  1x4 PCIe Lanes  | TQMx50UC_5.5.01.0052.06_X64_pcie1x4.bin    |
-|  :::  |  :::  |  1x2 + 2x1 PCIe Lanes  | TQMx50UC_5.5.01.0052.06_X64_pcie1x2_2x1.bin  |
-^  ^^^^
-|  **5.5.01.0052.05**  |  10.0.36.1030  |  4x1 PCIe Lanes  | TQMx50UC_5.5.01.0052.05_X64.bin  |
-|  :::  |  :::  |  1x4 PCIe Lanes  | TQMx50UC_5.5.01.0052.05_X64_pcie1x4.bin    |
-|  :::  |  :::  |  1x2 + 2x1 PCIe Lanes  | TQMx50UC_5.5.01.0052.05_X64_pcie1x2_2x1.bin  |
-^  ^^^^
-|  **5.5.01.0052.04**  |  10.0.36.1030  |  4x1 PCIe Lanes  | TQMx50UC_5.5.01.0052.04_X64.bin  |
 ===== Changelog =====
+{{section>.:data#changelog&noheader}}
-++++ 5.5.01.0052.07 |
-  *add support for LVDS bridge configuration
-  *switch boot logo from gif format to bmp format
-  *fix H2OUVE could not modify default SCU settings
-  *update SMBIOS Type 0 'BIOS release date'
-++++
-++++ 5.5.01.0052.06 |
-  * fix GbE is disabled in _pcie1x4 and _pcie_1x2_2x1 configuration
-  * reserve IRQs for TQ EAPI
-  * update SMBIOS Type 0 'BIOS release date'
-++++
-++++ 5.5.01.0052.05 |
-  * remove clearing of ULPS5 bit on every boot
-++++
-++++ 5.5.01.0052.04 |
-  * fix SATA power gating problem
-  * add setup option for S5 power state (ULPS5)
-  * restore setup defaults after three times reset inbetween 2s
-  * disable ASPM
-  * move up turbo mode menu in BIOS setup page
-  * hide unused setup items in SCU
-  * set SMBIOS data
-  * GOP: disable hotplug support / change Child Device List
-++++