This is an old revision of the document!
BIOS Overview
BIOS Overview
BIOS Revision | BIOS Version | ME Firmware Version | Chipset | PCI Configurations | BIOS Binary |
---|---|---|---|---|---|
Rev. 0102 | 5.12.09.53.15 | 11.8.55.3510 | CM238 | 8×1 PCIe Lanes | TQMx60_70EB_5.12.09.53.15.bin |
Rev. 0101 | 5.12.09.44.13 | 11.8.50.3434 | CM238 | 8×1 PCIe Lanes | TQMx60_70EB_5.12.09.44.13_cm238.bin |
2×4 PCIe Lanes | TQMx60_70EB_5.12.09.44.13_cm238_PCIe_2x4.bin | ||||
Rev. 0100 | 5.11.51.0024.01 | 11.6.13.1212 | CM238 | 8×1 PCIe Lanes | TQMx70EB_05.11.51.0024.01.bin |
Changelog
Changelog
5.12.09.53.15
- Insyde core update to tag 05.12.09.0053 / Close security gap Spectre Variant 2, 3a and 4
- add ME FW ME_11.8_Corporate_11.8.55.3510
- enable Usage of SPI Flashes not listed
- hide EC version
- hide Fab ID
- adapt LCD control shown in SCU
- integrate H2OUVE support
5.12.09.44.13
- Insyde core update to tag 05.12.09.0044
- add PEG PCI Express configuration menu
- add ME FW ME_11.8_Corporate_11.8.50.3434 (close security gap)
- add ME FW ME_11.8_Consumer_11.8.50.3434
- add support for SPI flash GD 25Q127C
- fix wrong negative temperature shown in HWM
- hide Fahrenheit temperature shown in HWM
- use Insyde function for 3 x reset processing
- fix no DP output with Xeon CPU with GT2 graphic
- add UEFI-LVDS functunality
- correct LVDS resolutions in setup menu
- Correct SMBIOS data
- add GPIO/SD-Card information in SioTqmx86 driver
- add eDP to LVDS bridge information in SioTqmx86 driver
- change to UEFI Boot Type by default
- Make IRQ 5, 6 and 7 for COMs in SioTqmx86 driver adjustable
- Do not suppress LCD Control when UEFI Boot Type
- adapt VBIOS and GOP configuration
- Add Consumer ME Firmware (for HM170)
- Add Chipset SKU HM170 (for HM170)
- Add Chipset SKU CM238 (for CM238)
- SioNct7802y: Implement fan scaling configuration
- SioNct7802y: add menu to configure fan PWM frequency
- fix not working eDP Display
5.11.51.0024.01
- Insyde 05.11.51.0024
- Corporate ME (CM238): 11.6.13.1212
- updated BIOS setup defaults
- simplify/clean-up setup menu
- adapt SioTqmx86Pkg to TQMx70EB
- adapt SioNct7802yPkg to TQMx70EB
- disable LVDS bridge hard by pin
- add menu to configure PWM frequency
- fix no DP output with Xeon CPU with GT2 graphic
- modify VBIOS and GOP configuration
- reserve some IRQs
- add support for EXAR XR28V382 dual UART SIO
- add support for XEON cpu with GT2 graphic
- remove MEBx front page icon/support
- fix lost setup values if CMOS is lost
- add USB touch support
- remove thunderbolt support
- add verb table for ALC262 codec on COME6-2 board
- switch from textual form browser to “normal” look & feel
- console redirection disabled by default
- TQ boot logo
- remove LPC decode range 0x0680…0x068F
- remove LPC decode range 0x1640…0x164F
- disable SioNct6776fPkg
- Enable build time flag in BIOS setup menu
- Enable snap-screen support
- Switch from debug to release version
- Start new revision .01
- Set Release Date