BIOS Overview

BIOS Overview

BIOS Revision BIOS Version ME Firmware Version Chipset PCI Configurations BIOS Binary
Rev. 0102 05.23.45.19.04 12.0.33.1424 Whiskeylake ULT 1 PCIe Lanes TQMx80UC_05.23.45.19.04.bin
Rev. 0101 05.23.45.19.03 12.0.33.1424 Whiskeylake ULT 1 PCIe Lanes TQMx80UC_05.23.45.19.03.bin
Rev. 0100 05.23.45.15.02 12.0.33.1424 Whiskeylake ULT 1 PCIe Lanes TQMx80UC_05.23.45.15.02.bin

Changelog

Changelog

05.23.45.19.04

  • Change Default configuration
  • Added Boot performance mode <Max Non-Turbo Performance>
  • Enabled cTDP BIOS Control
  • Adapt new GOP Version to TQMx80UC
  • Add new GOP Driver 9.0.1098 downloaded by Intel PlatformSW
  • Extend Help Text of cTDP 2
  • Add H2OUVE Tool Support
  • Adapt GOP/VBIOS to improve signal

05.23.45.13.02

  • Fix 'ME Image Re-Flash' Option not working correctly
  • Adapt help text for Active LFP
  • Fix not working EFP2 in VBIOS
  • Adapt PCIe Configuration menu
  • Integrate SioNct7802y
  • Import SioTqmx86 from TQMx60EB module
  • Add Switch to disabel LVDS bridge
  • Add Switch for COMe Lane configuration
  • Add Switch for GPIO/SD-Card configuration
  • Hide GPIO/SD-Card information
  • Add Swtich for COM Express Serial Handshake
  • Hide PCI Express PEG Port Configuration
  • Disable End Of Post Message
  • Change Default Configuration
  • Clock0 assignment <Enabled>
  • Clock2 assignment <Enabled>
  • Audio DSP <Disabled>
  • I2C0 Controller <Disabled>
  • I2C1 Controller <Disabled>
  • I2C4 Controller <Disabled>
  • UART0 Controller <Disabled>
  • ISH Controller <Disabled>
  • Flash Protection Range Registers (FPRR) <Disabled>
  • CNVi Mode <Disabled>
  • ACPI D3Cold Support <Disabled>
  • Topology (All PCIe Ports) <x1>
  • ASPM X (All PCIe Ports) <Disabled>
  • L1 Substates (All PCIe Ports) <Disabled>
  • Serial IRQ Mode <Continous>
  • Package C State Limit <C3>
  • PS2 Keyboard and Mouse <Disabled>
  • Numlock <On>
  • Adapt Setup menu
  • Reserve IRQ11 for use with (internal) PCI bus
  • Set SMBIOS data
  • Add USB touch support
  • Adapt VBIOS / GOP configuration
  • Enable Usage of SPI flashes not listed
  • Add verb table for ALC262 coded on COME6-2 carrier board
  • Disable Thunderbolt support
  • Decrease Boot Time
  • Disabel USB Type C
  • Disable SD, eMMC
  • Disable EC commands
  • Use OemSvcLoadDefaultSetupMenu for 3x reset processing
  • Add TQ boot logo
  • Add TQ specific GPIO Table
  • Disable Ps2 Keyboard in ACPI
  • Disable EC support
  • Disable End Of Post Message
  • Enable USB Hot key Support as default
  • Disable BIOS Lock
  • Integrate ME FW Corporate 12.0.32.1421
  • Disable clock output configuration (ITPXDP, SRC1, SRC3, SRC4, SRC5)
  • Set SPI re-binding
  • Set USB3.0 to Gen1
  • Enable Dual Read and add Winbond and Macronix chip to VSCC Entry
  • Set all GPIO voltages to 3,3 Volt
  • Adapt version number and string
  • Enable build time flag in BIOS setup menu
  • Do not only use primary display
  • Do not save password in CMOS
  • enable Snap-Screen support


Downloads

BIOS Downloads

TQMx80UC - BIOS Version 05.23.45.19.04
MD5SUM: C23BDE98A69B54A0F635498FBB7DDF60

TQMx80UC - BIOS Version 05.23.45.15.02
MD5SUM: 8185C6E7502B5D049F00BC2DD5A2740D

Driver Downloads

TQMx80UC - Driver package for Windows 10 64-bit
MD5SUM: C9E5D4DCD0DD9D86C1ADCA6B287A9079

  • Last modified: 2022/08/04 15:02