en

User Tools

Site Tools


vmware.png nfs.png tftp.png subversion.png eclipse.png logo.png tutorial.png

BIOS Overview

BIOS Revision TXE Firmware Version PCI Configurations BIOS Binary
5.12.30.21.12 3.1.50.2238 1 PCIe Lanes TQMxE39C_5.12.30.21.12.bin
1×4 PCIe Lanes TQMxE39C_5.12.30.21.12_PCIe_1x4.bin
1×2 + 2×1 PCIe Lanes TQMxE39C_5.12.30.21.12_PCIe_1x22x1.bin
5.12.30.21.09 3.1.50.2238 1 PCIe Lanes TQMxE39C_5.12.30.21.09.bin
1×4 PCIe Lanes TQMxE39C_5.12.30.21.09_PCIe_1x4.bin
1×2 + 2×1 PCIe Lanes TQMxE39C_5.12.30.21.09_PCIe_1x22x1.bin
5.12.30.21.08 3.1.50.2238 1 PCIe Lanes TQMxE39C_5.12.30.21.08.bin
1×4 PCIe Lanes TQMxE39C_5.12.30.21.08_PCIe_1x4.bin
1×2 + 2×1 PCIe Lanes TQMxE39C_5.12.30.21.08_PCIe_1x22x1.bin
5.12.09.16.04 3.0.20.1139 1 PCIe Lanes TQMxE39C_5.12.09.16.04.bin
1×4 PCIe Lanes TQMxE39C_5.12.09.16.04_PCIe_1x4.bin
1×2 + 2×1 PCIe Lanes TQMxE39C_5.12.09.16.04_PCIe_1x22x1.bin
5.11.47.13.01 3.0.11.1131 1 PCIe Lanes TQMxE39C1_5.11.47.13.01.bin

Changelog

5.12.30.21.12

5.12.30.21.09

5.12.30.21.08

5.12.09.16.04

5.11.47.13.01


BIOS-Update-USB Stick

Prerequisites

  • FAT formated USB-Stick with at least > 32 MiB storage
  • Latest H2OFFT™ (Firmware Flash Tool)

Creating BIOS-Update-USB Stick

Copy Insyde Firmware Flash Tool to USB-Stick

<USB key>
    ├───H2OFFT-Sx64.efi
 

The BIOS-Update-USB Stick is now ready for updating and flashing BIOS images.
For further Information please see the BIOS Update section.

BIOS Update

Prerequisites

<USB key>
    ├───H2OFFT-Sx64.efi
    ├───TQMxE39C_5.12.30.21.08.bin    

Perform BIOS Update

Attention: keyboard layout is US by default in BIOS setup!

  • Insert BIOS-Update-USB Stick to a Starterkit USB port
  • Enable „TXE Prepare For Update“ in the BIOS Menu and reboot system (Setup Utility > Advanced > Debug Configuration > TXE Prepare for Update > enabled)
  • Boot up the system and navigate into the EFI Shell (Boot Manager > Internal EFI Shell)
  • After starting the EFI Shell switch path to the USB stick by typing fs0:. This depends on the amount of connected mass storage devices. With command ls you can check the content of the path.
  • Launch BIOS update
fs0:\> H2OFFT-Sx64.efi <BIOS_Image>.bin –ALL -RA <Enter>

Example

⇒ BIOS will reboot into EFI shell after the update has finished succesfully

  • Leave EFI shell
Shell> exit
  • Select “Boot Manager”
  • Select desired boot device (e.g. Internal HD)
    ⇒ System will reboot from selected boot device


TQMxE39 Carrier SPI Flash Update

The Update of the Carrier SPI Flash is only possible with a working module, because the specific Data of the TQMxE39C1 is placed on the Carrier SPI Flash at the first boot from the SPI Flash.

How to:

  1. Connect USB key with desired BIOS file and Insyde Update Tool „H2OFFT-Sx64“
  2. Check the Boot Jumper X23/DIS1# (on Carrier), it must be open
  3. Apply the supply voltage of 12 V; The sytem boot in the EFI Shell
  4. Enable “TXE Prepare For Update” in the BIOS
  5. Reboot the system
  6. Close the Boot Jumper X23/DIS1# (on Carrier)
  7. Execute BIOS Update with the following commands:
Shell> fs0: <Enter>

fs0:> H2OFFT-Sx64.efi <BIOS file TQMxE39X_xxx.bin> -ALL -RA -N <Enter>
  1. Open the Boot Jumper X23/DIS1# (on Carrier) after a successful BIOS Update
  2. Then turn off the supply voltage
  3. Finish. Now you can update modules again with the Carrier SPI Flash



Boot Logo Replacement

This instruction guides you through the procedure of replacing the Bootlogo using the Insyde UEFI/BIOS tool called H2OLRT (Logo Replacement Tool).

Please note that the logo replacement can only be done in the integrated EFI Shell.
Furthermore, this tool is only available on request, please contact support@t1;-group.com.

Prerequisites

Prepare BIOS-Update-USB Stick and add the following components:

  • Logo Replacement Tool (H2OLRT-Sx64.efi)
  • Appropriate BIOS file for your TQ module (e.g. TQMxE39C_5.12.09.16.04.bin)
  • Picture formated as *.jpg (e.g. example_picture.jpg)

Replace Boot Logo via EFI Shell

The H2OLRT (Logo Replacement Tool)generates a BIOS file that contains the desired Boot Logo instead of the TQ Logo.

  • Insert the BIOS-Update-USB Stick to a Starterkit USB port
  • Boot up the system and navigate into the EFI Shell (Boot Manager > Internal EFI Shell)
  • After starting the EFI Shell switch path to the USB stick by typing fs0:.This depends on the amount of conected mass storage devices; with command ls you can check the content of the path.
  • The generic command and the following example shows how to start the Logo Replacement.
H2OLRT-Sx64.efi –replogo:<SrcBIOSImageName> –logopath:<LogoImagePathName> -logoindex:<IndexNum> –logoconvert:<ConvertNum> –out:<OutBIOSImageName>

Example


H2OLRT-Sx64.efi Variable description

Variable Description
<SrcBIOSImageName> BIOS file in which the logo should be replaced
<LogoImagePathName> Path and name of the replacement picture
<IndexNum> Default index, where the picture must be stored.
e.g. TQMxE39C Logoindex: 1
<ConvertNum> 0 = keep original image's format and dimension.
1 [default] = auto convert the image's format and dimension.
<OutBIOSImageName> path and name of the generated BIOS file


  • Next step is to flash the customized BIOS Binary, please see the BIOS Update section.

Boot from external BIOS

MB-COME6-1

X23
SM Bus CLK 1 2 I2C Bus CLK
SM Bus DAT 3 4 I2C Bus DAT
SM Bus Alert 5 6 3V3
BIOS_DIS0# 7 8 GND
BIOS_DIS1# 9 10 GND

If there is no Jumper present on the BIOS_DIS1# signal and GND the module will load its BIOS from the internal SPI flash.
If there is a Jumper on the BIOS_DIS1# signal and GND the module loads its BIOS from the flash in the SPI socket of the carrier board.

Downloads


BIOS Downloads


TQMxE39C 5.12.30.21.12
MD5SUM:F378D6F8834CAEA6BCE4644F6A768CDC:

TQMxE39C 5.12.30.21.09
MD5SUM:3F301F12543131604C3046DF41058825

TQMxE39C 5.12.30.21.08
MD5SUM:FEF68BBA1C9F6D0BE4BE4476C9ABB814

TQMxE39C 5.12.09.16.04
MD5SUM:9E8EBA7D763F1272729AA0BB2B023C60

Driver Downloads


Driver package for TQMx39x Windows 10 64-bit
MD5SUM:AF2EEA9D4EA8BED6658D581CD2FCB759


On-board I2C devices

Bus Destination Function Address 8-bit Address 7-bit
SMBUS SODIMM Thermal Sensor (CH-A) 0x301) 0x18
SODIMM SPD EEPROM (CH-A) 0xA0 0x50
SODIMM Thermal Sensor (CH-B) 0x342) 0x1A
SODIMM SPD EEPROM (CH-B) 0xA4 0x52
NCT7802 Hardware Monitor 0x58 0x2C
FPGA non non non
COMe Con. any N/A3) N/A
I2C COMe 24LC32 COMe EEPROM 0xA0 0x50
COMe Con. any N/A4) N/A
I2C intern PTN3460IBS-F2 LVDS-Bridge 0xC0 0x60
1) , 2)
Availability depends on SODIMM vendor
3) , 4)
Availability and addresses depend on customer

en/x86/tqmxe39c1/data.txt · Last modified: 2019/11/28 11:49 by bujupib


Disclaimer

TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.


Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
Recent changes RSS feed Valid XHTML 1.0 Valid CSS Driven by DokuWiki