en

User Tools

Site Tools


vmware.png nfs.png tftp.png subversion.png eclipse.png logo.png tutorial.png

Embedded module TQMxE39C2 Documentation



BIOS Tools

TQ provides tools from Insyde® for the UEFI BIOS which allows the customization of the BIOS.

Please Note: The following Tools are only available on request.
For further Information please contact Support.

  • H2OFFT™ REV.200 (Firmware Flash Tool) for performing BIOS Update
  • H2OUVE™ REV.200 (UEFI Variable Editor) to customize default BIOS Options
  • H2OLRT™ REV.100 (Logo Replacement Tool) for a customized boot logo
  • H2OSDE™ REV.200 (SMBIOS Data Editor) to facilitate easy modification of any SMBIOS (DMI) field
  • H2OEZE™ REV.100 (Easy Binary Editor) to edit binaries in the BIOS, including Option ROMs, driver binaries, logos, and Setup values


Further Tools are only available from Insyde®:

  • H2ODDT™ (Developer Debug Tool) for source code level Diagnostic and Debugging
  • H2OPCM™ (Power Cycle Manager) for assisting in power-cycling the system while watching for initialization failures
  • H2ORTE™ (Register and Table Editor)
  • H2OELV™ (Event Log Viewer)


Using BIOS Tools

H2OFFT (Firmware Flash Tool)

The H2OFFT (Firmware Flash Tool) to perform BIOS updates under supported OS environment.

Prerequisites

  • FAT formatted USB stick with at least 32 MB of free storage space
  • The BIOS-Tools ZIP file

Update BIOS via EFI-Shell

Update BIOS on Windows

Update BIOS on Linux


H2OUVE (UEFI Variable Editor)

The H2OUVE (UEFI Variable Editor) allows to edit setup settings and variable data of the BIOS Image.

Prerequisites

  • FAT formatted USB stick with at least 32 MB of free storage space
  • The BIOS-Tools ZIP file

Using H2OUVE in the EFI-Shell

Using H2OUVE on Windows

Using H2OUVE on Linux


H2OLRT (Logo Replacement Tool)

This instructions guide you through the procedure of replacing the Bootlogo in EFI-Shell, Windows and Linux.
The H2OLRT (Logo Replacement Tool) generates a BIOS file that contains the desired Boot Logo instead of the TQ Logo.

Prerequisites

  • FAT formatted USB stick with at least 32 MB of free storage space
  • The BIOS-Tools ZIP file

Replace Boot Logo via EFI Shell



en/x86/tqmxe39c2/bios_tools.txt · Last modified: 2019/10/17 13:18 by bujupib


Disclaimer

TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.


Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
Recent changes RSS feed Valid XHTML 1.0 Valid CSS Driven by DokuWiki